本文为您带来元模的英文翻译，包括元模用英语怎么说，元模用英语怎么说，元模的英语造句，元模的英文原声例

本文为您带来元模的英文翻译，包括元模用英语怎么说，元模用英语怎么说，元模的英语造句，元模的英文原声例句，元模的相关英语短语等内容。

元模的英文翻译，元模的英语怎么说？

元模的英语网络释义

元模的汉英大词典

元模的英语短语

元模的英文例句

介绍了汽车玻璃落模弯曲成形中回弹的机制，建立了有限元模型。

The spring-back mechanism in the drop bend-forming of automotive glass is introduced, and the finite element model is established.

通过实验及ANSYS/LS_DYNA程序的有限元模拟，对平板件的电磁自由成型及有模成型的变形模式进行了研究。

Through experiments and FEM of ANSYS/LS_DYNA program, the deforming mode for free electromagnetic forming and modeled forming of sheet metals are analyzed.

本文在分布位移模型的基础上提出同时推求坝体和坝基弹模的方法，使大坝的有限元模型能反映在水压作用的整个坝体变形性质。

Based on the mathematical model of displacement distribution, a method useful to evaluate elastic modulus of dam body and its foundation is proposed, and a FEM model is for...

分析齿轮摆辗凹模的失效形式，并且通过改变直齿圆锥齿轮摆辗的工艺参数的有限元模拟，探讨了凹模进给量、摩擦系数和摆头倾角的改变量对凹模应力影响以及对凹模失效形式的影响。

The failure form of rotary roll cavity die for straight tooth bevel gear was analyzed, and the finite element simulation method was employed to change the processing parameter of rotary roll.

皮肤、肌肉、血管和神经元从芽基中长出来，最终生长成为和原来肢体几乎一模一样的新肢体。

From the blastema come skin, muscle, bone, blood vessels and neurons, ultimately growing into a limb virtually identical to the old one.

您可以使用drbdsetup 在Linux内核中配置DRBD 模快，使用drbdmeta管理 DRBD 元数据结构。

You use the drbdsetup utility to configure the DRBD module in the Linux kernel and drbdmeta to manage DRBD's metadata structures.

TVM二元制导技术作为多模复合制导技术的一个分支，由于其技术先进、性能优越，受到各国广泛重视和重点研究。

TVM guidance as a subfield of multi-mode compound guidance is be paid more attention to and researched on by many countries because of its advanced technology.

对刚塑性有限元计算的结果与试验结果进行比较，并提出缩口的最佳模角。

The theoretically calculating results are compared with those of experiment and the optimum die Angle in nosing process is proposed.

结果三弹性腔九元件集中参数模型模拟出的输入阻抗模和幅角与目标输入阻抗模和幅角能较好的吻合。

G. Fung et al. Results the modulus and phase simulated by the nine-element lumped parameter model could fit the goal input impedance well.

为此先推导离散格林函数的权模估计和有限元解的渐近不等式展开，然后给出公式的证明。

For this, we derive the weighted estimates for discreet Green function and the asymptotic error expansion inequalities, and then the proofs of the formulas are given.

本文讨论二维奇异非稳态问题的有限元方法，证明了弱解的存在唯一性，并给出有限元解的加权L2-模估计。

The existence and uniqueness of the solution to these problems with the use of FEM are proved and optimal error estimates in weighted L2-norm are given.

此外，推导出波导tm、TE模的传输功率、损耗功率、衰减常数、等效阻抗等特征参数的边界元公式。

Furthermore, the formulae of transmitted power, loss power, attenuation constant and equivalent impedance for TM and te modes are deduced.

采用矢量有限元方法计算了任意轴对称谐振腔高阶模的本征频率。

Eigenfrequencies of high order modes in the axial-symmetric cavities are computed with a vector finite element method.

首先根据由误差四元数和误差角速度描述的跟踪误差动力学和运动学方程，设计了基于李亚普诺夫方法的滑模变结构控制律。

First, according to the tracking error dynamics and kinematics described by unit quaternion error and angular velocity error, a sliding mode controller is derived based on Lyapunov theory.

有限元分析结果表明，保温砌模混凝土墙的抗侧刚度可用厚度为其三分之二的等效实体墙计算或用小开口整体墙计算。

Finite element analysis shows that the lateral stiffness of the concrete grill wa ll can be calculated by an equivalent solid shear wall with the thickness of two third of the original wall thickness.

采用ANSYS软件对前、后固定模板及动模板的挠度进行了有限元计算，进而求解了合模机构的系统刚度及临界角。

Utilize ANSYS to compute deflection of the each of moldboard stroke in infinite elements' method and then solve the systematical stiffness and the critical Angle of clamping unit.

建立了基于欧拉方法描述树脂传递模塑(rtm)工艺充模过程的基本数学方程，并采用有限元隐式时间积分方法对基本方程进行了数值求解。

A mathematical equation described by Euler method for simulating RTM process is established, and a finite element method with implicit time integration is used to solve this equation.

建立了双曲率蜂窝夹层板在“点阵钉模、真空负压”条件下成形的有限元分析模型。

A finite element model was established to simulate the forming process of double curvature honeycomb sandwich panel under the conditions of "nails die, vacuum".

采用有限元多晶体模型对无模多点成形条件下不同加载方式的板条多点弯曲成形过程进行了数值模拟。

Numerical simulation of multi point bending process of strip under different loading paths is dealt with the finite element polycrystal model.

给出各向异性双线性元的插值能量模和零模估计。

We use anisotropic bilinear finite element to solve linear parbolic problem.

针对直接驱动的交流永磁直线伺服系统，提出一种基于神经元补偿控制的全程滑模变结构控制策略。

A global sliding model variable structure control scheme based on artificial neuron compensation for a direct drive AC permanent magnet linear servo system are presented in this paper.

应用全矢量电磁场有限元方法，计算了保偏光纤的两个偏振模场的分布、传输常数及模式双折射。

This fiber's polarization modes, transmitting constants and modal birefringence were computed by the full vector finite element method.

把光子理解为一个电磁模的元激发，光子亦具有内部运动。

A photon is explained as an exciton of the electromagnetic mode, and the photon has an internal motion.

采用大变形刚塑性有限元法模拟超塑性材料轴对称锥形模约束胀形过程。

The constrained superplastic bulging process is investigated by a large rigid-plastic finite element method.

考虑了二维奇异线性及半线性椭圆和抛物问题的有限元方法，给出加权L2 模的误差估计。

The finite element methods of a class of singular linear and semilinear elliptic and parabolic problems are considered and the error estimates in weighted L2 norm are derived.

该集成系统的进一步完善，可完成模面设计，冲压工艺基本评估，单元划分，有限元求解的格式文件的生成，有限元分析和分析结果的调用。

With further development, the drawing part model designing, mesh generating, the stamping process analyzing and analysis results evaluating can be finished in this platform.

平面波超元算法的结果表明：(1)平板光子晶体导模中存在带隙。

The results of the plane wave method with super cell shows: (1) photonic band gaps exist in the guided modes of the photonic crystal slabs.

平面波超元算法的结果表明：(1)平板光子晶体导模中存在带隙。

The results of the plane wave method with super cell shows: (1) photonic band gaps exist in the guided modes of the photonic crystal slabs.

元模的原声例句

元模的网络释义

元模 元模，读音是yuán mó，汉语词语，是指黑狐的别名。

以上关于元模的英语翻译来自英汉大词典，希望对您学习元模的英语有帮助。