本文为您带来冲深的英文翻译，包括冲深用英语怎么说，冲深用英语怎么说，冲深的英语造句，冲深的英文原声例

本文为您带来冲深的英文翻译，包括冲深用英语怎么说，冲深用英语怎么说，冲深的英语造句，冲深的英文原声例句，冲深的相关英语短语等内容。

冲深的英文翻译，冲深的英语怎么说？

冲深的英语网络释义

... Two-cables Suspension Structure双主索悬挂结构 Scouring Depth冲深 TrechlessTenology非开挖技术 ...

冲深的汉英大词典

冲深的英语短语

冲深的英文例句

经过验算，冲深与抛石稳定性的计算与实际工程的结果较为一致。

The calculation results of scour depth and stabilization of riprap are consistent with the actual situation.

根据河湾迎流顶冲位置和河床冲深，确定护岸范围和优选护岸护底方案。

Based on the scouring position and depth by current in river bend the scope of bank protection and better selection scheme of bank protection are determined.

丁坝冲深极限值是确定建筑物基础埋设深度的一个主要因素，丁坝设计和施工中的关键问题在于确定坝头最大冲深。

The scour limit depth around spur dikes is very important for calculating the base depth of objects and it is a key factor in designing and working.

结果表明，较低的铁素体轧制温度和较高的铁素体区压下量时，IF钢具有更高的深冲性能、相对较高的强度、延伸率以及织构强度。

The results showed that the if steel has better deep drawability, higher mechanical and texture strength and elongation if the hot rolling temperature was low with big reduction in ferrite region.

可显著提高热轧if钢的强度，但同时也导致其深冲性能降低。

P enhances the strength of hot-rolled if steel significantly, but it also reduces its deep draw ability.

介绍了超深冲if钢及其在汽车上应用的情况。

This paper introduces the extra-deep drawing IF steel and its application on automobiles.

介绍了采用电子背散射衍射测定深冲用再结晶铌板织构的结果。

Textures in deep punching niobium sheets have been examined by the EBSD technology in the present paper.

对连续退火或罩式退火后的深冲钢板和超深冲钢板的组织以及织构进行了观测和分析。

The structure and texture of continuous or batch annealing deep drawing and extra-deep drawing steel sheets were observed and analyzed.

通过轧制温度、轧制方式实验，以及织构和力学性能分析，研究了轧制工艺对液晶显示背光源用的深冲钼带的组织和性能的影响。

The effect of rolling process on the microstructure and mechanical properties of deep-drawing molybdenum strip was investigated in this paper through changing rolling temperature and rolling process.

试验结果表明，某些汽车零件采用热轧深冲钢板生产是可行的。

Experiments' results show that it is possible using RSCA to produce some automotive parts.

深冲部件提供了对内部工作面镀金的能力，还可以在工作时抛光和硬化壳壁以延长产品寿命。

Deep drawn parts offer the ability to pre-plate the internal working faces with gold, while also work-polishing and hardening the wall to optimize product lifetime.

结合冷挤压与拉深工艺的特点，以双杯形工件为对象，开展了冲锻成形过程的强力拉深增厚工艺研究。

A powerful drawing-thickening technology was prompted for double-cup-shaped workpieces, it combined the characteristics of cold extrusion with drawing process.

if钢的冷轧压下率分配对深冲性能有重要的影响，是由于冷轧过程的压下率对(111)织构的形成有影响。

The reduction partition has effect important in two-time cold rolling on Drawability of IF steel, because reduction has effect in cold rolling on {111} texture.

研究了深冲用3003-o铝合金带材合理的生产工艺，在化学成分和铸造、热轧、冷轧工艺确定的情况下，试验研究成品退火工艺制度。

Studied the annealing institution of 3003-o aluminum alloy strip for drawing is researched, while the chemical composition and casting, hot rolling, the cold rolling, process were determined.

为拼接超宽汽车用板，对深冲钢板进行了激光焊接试验研究。

To obtain extra wide steel sheet for automobile use experiments were conducted on laser welding of deep drawing steel sheet.

论述了某单位在制造不锈钢深冲制品中产品发生开裂的原因。

The cracking reason was discussed when one plant produced deep-pressing stainless steel products.

研究了锻造开坯、轧制、热处理工艺对铌带深冲性能的影响。

The niobium strips were fabricated by forging-cogging, rolling and heat treatment.

对唐山建龙实业有限公司SPHD深冲钢冶炼过程中的控硫技术进行了分析。

It is analyzed the controlling-sulfur technique in smelting of SPHD deep drawing steel.

介绍了本钢薄板坯连铸连轧工艺生产冷轧深冲钢(IF钢)的情况。

This paper describes the production condition of cold rolled deep drawing quality steel (IF steel) by thin slab continuous casting and rolling technique in Bengang.

洪水想必深达三米，树一棵接一棵地倒了，被洪水冲断了。

Tree after tree went down, cut down by the water, which must have been three meters deep.

同时讨论了织构形成机制，为深冲钼板的加工和研究提供了依据。

The mechanism of the textures formation were also discussed to provide a reference for the processing and research of deep drawn Mo Plates.

河岸抗冲稳定性较强，并经常出现高含沙量大洪水，是形成渭河下游窄深河槽的关键。

The strong scour resistance and stability of the Banks and coming big floods always with high sediment concentration are the key fators for forming a narrow and deep channel in the lower wei River.

然而，现今的研究中，相对于冲裁、拉深、弯曲等冲压基本工序而言，关于翻边工艺方面的研究比较少，与翻边有关的文献资料更为有限。

However, compared with other stamping processes such as blanking, drawing and bending, the investigation about flanging process is very limited in existing documents.

此外，拉深速度和冲头温度对AZ31镁合金的拉深成形也有重要影响。

Further, deep drawing speeds and punch temperatures during deep drawing process can also exert significant influence on the deep drawing of AZ31 magnesium alloy.

介绍了深冲钢的转炉——连铸生产工艺及产品开发情况；

This paper introduces the technical process of converter continuous casting of deep drawing steel and its development of products.

这些逆冲断层具有切割深、断距大、剖面宽度大的特点。

These thrust faults are found in the study to be characterized with deep dissection, big separation and major width of the section.

此模具既可以冲孔落料工作，还可以根据零件成型性质和特点，完成一些成型工序比如压筋，冲窝，弯曲，拉深的工作。

This tool can be charged for a work falls. It can also shaped by parts of nature and characteristics. It can finish some core of such pressure process, and bending down the work of the deep.

采用唐山钢铁股份有限公司FTSR连铸连轧生产线生产的热轧卷作为生产冷轧低碳钢板的原料，研究了不同卷取温度和冷轧压下率对冷轧薄板深冲性能的影响。

The effects of coiling temperature and cold rolling reduction ratio on deep-drawing properties of low-carbon sheets hot-rolled by FTSR of Tangsteel were investigated in laboratory.

采用唐山钢铁股份有限公司FTSR连铸连轧生产线生产的热轧卷作为生产冷轧低碳钢板的原料，研究了不同卷取温度和冷轧压下率对冷轧薄板深冲性能的影响。

The effects of coiling temperature and cold rolling reduction ratio on deep-drawing properties of low-carbon sheets hot-rolled by FTSR of Tangsteel were investigated in laboratory.

冲深的原声例句

冲深的网络释义

冲深 冲深，汉语词语，拼音为chōng shēn，意思是幽深；深奥。

以上关于冲深的英语翻译来自英汉大词典，希望对您学习冲深的英语有帮助。