冷却强度英语怎么说

admin2024年10月22日中英词典4460

本文为您带来冷却强度的英文翻译,包括冷却强度用英语怎么说,冷却强度用英语怎么说,冷却强度的英语造句,

本文为您带来冷却强度的英文翻译,包括冷却强度用英语怎么说冷却强度用英语怎么说冷却强度的英语造句冷却强度的英文原声例句冷却强度的相关英语短语等内容。

冷却强度的英文翻译,冷却强度的英语怎么说?

  • intensity of cooling ; cooling intensity

冷却强度的英语网络释义

... 冷却气流 cooling blast 冷却强度 intensity of cooling 冷却区 cooling space ...

冷却强度

冷却强度的汉英大词典

冷却强度

  • intensity of cooling

冷却强度的英语短语

  • 加场冷却磁化强度FC magnetization

  • 零场冷却磁化强度ZFC magnetization

冷却强度的英文例句

此系统改进了冷却方式,提高了冷却强度

The system improved on the cooling method and advanced the coo…

得出终轧温度过高、冷却强度不够及冷却不均是钢筋表面起泡的重要影响因素。

It is concluded that too high fish rolling temperature, too low cooling intensity and unsymmetrical cooling are main causes.

悬浮浇注增加铸钢凝固期间的冷却强度,缩短凝固时间,增加体积凝固的倾向性。

In suspension pouring process the increase of cooling intensity during the solidification period will increase the tendency of volume solidification and decrease the solidification time.

与普通水缝式结晶器相比,铸坯温度场均匀,坯壳厚度均匀,冷却强度有所提高。

Comparing to the normal water cooling type mold, spray-type mold is more homogeneous in temperature field and in thickness of solidified shell and is higher in cooling intensity.

因此可根据坯壳厚度合理地确定冷却强度及拉坯速度或由冷却强度预测坯壳厚度。

Therefore, the cooling intensity and the casting speed can be rationally determined by the thickness of strand shell.

莱钢炼钢厂应用高冷却强度结晶器技术,将原组合铜板式断面结晶器改造为高效管式结晶器。

The mould technology with high cooling intensity is adopted in the steel-making plant of Laigang to transform general built-up mould to high effective tube mould.

阐述45优质窄带钢的开发,结合CCT曲线介绍轧制变形量、冷却强度对产品性能的影响。

It is introduced the development of 45a narrow strip and introduced the influence on the production performance by the deformation and the strength of cooling by CCT curve.

根据模拟计算结果发现,在拉速一定的条件下,过热度和冷却强度对钢液的凝固前沿有着显著的影响。

It is found from the result of calculation that when casting speed is constant, superheat and intensity of cooling have remarkable influence on the front edge of solidified shell.

通过对高炉操作炉型的分析认为,炼铁4#高炉炉况变差、炉腹结厚的原因是炉渣性能差、碱度高,炉体冷却强度大。

The reasons why the condition of #4 BF is poor and its bosh thickens are that poor performance, high basicity and great cooling intension of slag.

采取降低中间包的过热度,适当降低拉坯速度,减小铸坯的二次冷却强度等措施,对减少这种缺陷的出现有明显的效果。

Measures of lowering the liquid steel superheat, decreasing the casting speed of bloom and reduction billet's secondary cooling strength are obviously effective to reduce such kinds of defects.

研究结果表明,冷却强度是晶粒细化的最主要因素,极差为57.946,可信度达到99%,其次是保温时间与浇注温度。

The results indicate, the main factor for grain refinement is cooling intensity, its polar odds is 57.946 and reliability is 99%. The next facts are preservation time and pouring temperature.

此时,挤压粘接碳纤维层,冷却聚合胶,之后再进行材料强度和韧性的测试。

The layers were then pressed together and the glue was allowed to cool, before the material was tested for strength and toughness.

一旦经过冷却和测验,这些钢块就已经准备好用于太空事业和石油钻探这两个十分需要高强度钢材的领域。

Once cooled and tested, the blocks of steel are readyfor use in aerospace and oil-drilling, where high-strength steel is prized.

这是由于磁力强度的增大,使电机定子与转子之间的间隙增大了一倍,大大改善了冷却效果。

This is due to the increase of magnetic strength, make motor stator and rotor clearances between doubled, has greatly improved the cooling effect.

为提高产品的强度及韧性,适应以后的冷轧工艺,根据某厂现场条件,制定了合理的冷却制度,效果良好。

Based on the production condition, a rational cooling schedule was established for improving the product strength and malleability to fit the subsequent cold rolling process.

对RCC高坝埋设高强度聚乙烯冷却水管技术进行了研究。

For the RCC high dam embedding high strength polyethylene cooling water pipe is studied.

提高冷轧薄板机械强度的方法主要是在炼钢时添加有益的合金元素及在热处理时提高退火后的冷却速率。

The methods to improve the intensity of cold-rolled sheets is to add some useful alloying elements during steel-making and improve the cooling rate annealing treatment.

兰州重离子加速器冷却储存环工程(HIRFL CSR)主环和实验环上带电粒子束流强度的测量和监视拟由环型束流变压器实现。

The intensity of a pulsed beam of charged particles in the Cooling Storage Ring Project of Heavy Ion Research Facility in Lanzhou (HIRFL-CSR) will be measured with a toroidal current transformer.

指出连续式正火炉后面应考虑建设适当的加速冷却设备,以提高正火后钢板的强度

It is pointed out that accelerated cooling equipments should be built behind the continuous-type normalizing furnace, to improve the strength of normalized steel plates.

研究了模压成型过程中加压时机、冷却方式及人造石墨原料对复合材料电导率和弯曲强度的影响。

The influences of different synthetic graphite, pressure applying moment and cooling-down methods on electrical conductivity and bending strength of the composites were investigated.

通过控制轧制、控制冷却,可提高钢的强度、而不损害钢的磁通密度。

By controlling hot rolling temperature and cooling rate, the strength of the steel can be increased while the magnetic flux density will not be affected.

进行三组敏感性试验,研究凝结潜热释放,蒸发冷却与地表热通量对气旋结构与强度的影响。

Three additional sensitive experiments are carried out to investigate the effect of condensation latent heating, evaporation cooling and surface heat flux.

结果表明:在不同受热温度和冷却方式条件下,纸面石膏板的结构和强度将发生改变。

The results show that under the condition of different fire temperatures and cooling ways, the structure and intensity of thistle board are different.

针对热轧带钢因卷取后钢卷内外圈与芯部的冷却速度不同,导致带钢成品头尾强度高、塑性低的问题,提出了卷取温度凹型控制模式。

U-shaped control model for coiling temperature was put forward to improve the high strength and low plasticity of head and tail of hot rolled strip.

探讨了受火温度、高温后静置时间及冷却和养护方式对火灾高温后混凝土抗压强度的影响。

The effects of high temperature, standing time after cooling, methods of cooling and curing on the compressive strength of concrete are discussed.

试验结果表明,焊后炉中冷却始温对焊缝焊接强度影响最大,冷却时间次之,焊前脱水方式对焊接强度影响最小。

The test results indicate that cooling beginning temperature after brazing is most influential to its joint strength, then the cooling hours and finally the way of dehydrating before brazing.

游泳对于限制您的运动强度很有好处,水对人体的压力能够使人的心率降低,而水温有冷却的效果。

Swimming is good for limiting your intensity level, as the effect of water pressure on the body lowers the heart rate, while the water temperature has a cooling effect.

这种失效的原因在这些局部可能是由于机械和热应力的双重作用超过了辊子自身的材质的抗屈服强度所导致的,并且在进一步冷却中还会进一步扩展。

These cracks occur when the combination of mechanical and thermal stresses within these local areas pass over the yield strength of the barrel material and are exaggerated during subsequent cooling.

用正交各向异性壳体理论,对大型逆流式冷却塔的玻璃钢导风筒进行了强度、刚度和稳定性分析。

In this paper, the strength, stiffness and buckling of large FRP conducting wind channel in cooling tower are analyzed using orthotropic shell theory.

通过加速冷却,可以在不影响强度的前提下,降低碳当量以改善钢的韧性和焊接性。

Carbon content can be reduced to improve toughness without loss in strength by strictly controlling accelerated cooling processes.

冷却强度的原声例句

冷却强度的网络释义

冷却强度 高炉某部位需要由冷却水带走的热量称为热负荷,单位面积炉衬或炉壳的热负荷称为冷却强度。热负荷可写为:Q=CM(t-t0)*1000 Q----热负荷,kj/h M----冷却水消耗量,t/h C----水的比热容,kj/(kg.℃) t-----来水温度,℃ t0----出水温度,℃

以上关于冷却强度的英语翻译来自英汉大词典,希望对您学习冷却强度的英语有帮助。

返回列表

上一篇:令人堪忧英语怎么说

没有最新的文章了...