本文为您带来切削的英文翻译，包括切削用英语怎么说，切削用英语怎么说，切削的英语造句，切削的英文原声例

本文为您带来切削的英文翻译，包括切削用英语怎么说，切削用英语怎么说，切削的英语造句，切削的英文原声例句，切削的相关英语短语等内容。

切削的英文翻译，切削的英语怎么说？

切削的英语网络释义

JX528 468Q发动机缸体双面卧式钻床总体设计及左主轴箱设计_机械设计毕业论文、模具设计论文、数控论文范文_毕业论文天下网 关键词：组合机床，主轴箱，切削 [gap=1262]Key word: Aggregate machine-tool, headstock, cutting

切削(Cut)： 类似刀之切割或刻划。 如以食指分割豆腐、 指甲切断花梗， e.

... stock-pile 储存，堆放 stock removal 切削 stoke 斯（动力粘度单位） ...

... bend（弯曲） taper（切削） twist（扭曲） ...

切削的汉英大词典

切削[qiē xiāo]

• {机} cutting; cut; profiling:

  rough cut;

  粗切削

  high-speed cutting;

  高速切削

• 短语:
  • 切削比 cutting ratio;
  • 切削比压 specific cutting pressure;
  • 切削表面 cutting surface;
  • 切削常数 machining constant;
  • 切削层 cutting lay;
  • 切削刀痕 cutter mark;
  • 切削刀具作业线 cutterline;
  • 切削刀片 cutting tip;
  • 切削动作 stock removal action;
  • 切削功 cutting power;
  • 切削工 skiver;
  • 切削工作 cutwork;
  • 切削规 {木} cutting gauge;
  • 切削合力 resultant tool force;
  • 切削痕迹 revolution mark;
  • 切削厚度 cutting thickness;
  • 切削厚度比 {机} cutting ratio;
  • 切削弧 cutting arc;
  • 切削机 cutting machine;
  • 切削机床 stock-removing machine;
  • 切削加工单 {木} cutting list;
  • 切削角 {机} cutting angle;
  • 切削抗力 resistance to cutting;
  • 切削宽度 cutting width;
  • 切削冷却 cooling for cut;
  • 切削冷却液 cutting coolant;
  • 切削冷却装置 cut cooling system;
  • 切削率 stock removal rate;
  • 切削面 cutting face;
  • 切削面积 area of cut;
  • 切削能力 chip capacity;
  • 切削能量 cutting energy;
  • 切削扭矩 cutting moment of torque;
  • 切削盘 cutting disc;
  • 切削片 cutting blade;
  • 切削强度 cutting hardness;
  • 切削热 cutting heat;
  • 切削刃 {设计} cutting edge;
  • 切削容量 work capacity;
  • 切削试验 cutting test;
  • 切削寿命 working durability (of cutting tool);
  • 切削速度 cutting speed;
  • 切削凸轮 cutting cam;
  • 切削温度 cutting temperature;
  • 切削向量 cut vector;
  • 切削行程 cutting stroke;
  • 切削行程时间 cutting stroke time;
  • 切削性 cutability;
  • 切削性能 {冶} machinability;
  • 切削性能指数 {机} machinability index;
  • 切削用量 cutting data;
  • 切削油膏 cutting paste;
  • 切削余量 chipping allowance;
  • 切削振动 cutting vibration;
  • 切削中心 turning centre;
  • 切削钻 {机} cutting drilling;
  • 切削阻力 cutting resistance

切削的英语短语

切削的英文例句

本公司一直致力于为用户提供高质量的测量仪器和切削工具。

The company has been committed to providing customers with high-quality measuring instruments and cutting tools.

不能直接观察到刀具的切削情况。

Two, can not directly observe the cutting tool.

聪明的木匠会测量两次尺寸，再切削。

The wise carpenter measures twice and cuts once.

磨料在磨具中起切削作用。

Abrasive in the abrasive cutting role to play.

分析了切削硬岩时的刀具磨损和破损特征。

The wear and rupture of cutting tool are investigated.

然而，这不减去从这颗独特宝石切削刀的爱。

However, this does not detract from the cutters' love of this unique gem.

这种金属容易切削。

This metal cuts easily.

这些事实说明了金属切削在常规制造中的重要性。

These facts show the importance of metal cutting in general manufacturing.

切削温度的改变。

Change in the cutting temperature.

切削温度的变化。

Change in the cutting temperature.

然而逆铣仍经常被用在工业上，尤其是粗切削时。

Nevertheless, up milling is commonly used in industry, especially for rough cuts.

磨轮用非常大量的微型切削刃模仿铣刀进行切削。

The latter simulates a milling cutter with an extremely large number of miniature cutting edges.

激光可以非常精确地切削角膜组织且不损伤邻近组织。

The laser removes tissue from the cornea very accurately without damaging nearby tissues.

一些科学家曾在古代石器的切削迹象上发现右手偏好。

Some scientists had previously detected a right-hand bias when they looked at the flaking patterns on ancient stone tools.

切削速度只有在对表面粗糙度不做要求的时候才不重要。

Cutting speed only in the surface roughness not required when it is not important.

铣削用一个称为“铣刀”的旋转多刃刀具进行金属切削。

Milling: removes metal with a revolving, multiple cutting edge tool called milling cutter.

切削用量三要素包括切削速度、进给量和（或叫吃刀量）。

Thee three factors of cutting include cutting speed, feed and the depth of cut.

为了配合曲线轮廓，必须切削每块木瓦，这减慢了我的进度。

Having to custom cut each shingle to match the contour of the curves slowed my progress.

空间的栏目，如果可能，适合使用胶合板床单等装饰无切削。

Space columns, if possible, to fit the use of plywood sheets for decking without cutting.

端面车削既可以从外表面向内切削也可以从工件中心往外切削。

Facing can be carried out either from the periphery inward or from the center of the workpiece outward.

正确的选择切削速度对所有金属的切割操作成本都有有很大的影响。

The selection of the correct cutting speed has an important bearing on the economics of all metal cutting operations.

磨损机理为切削磨损和脆性相断裂，其中切削磨损为主要磨损机理。

Wear mechanisms are cutting wear and brittle phase rupture. Cutting wear is main wear mechanism.

在切削不同的直径不同的材料和工作时，车床必须以不同的速度加工。

On turning different materials and works of different diameters, lathes must be run at different speeds.

选择正确的切削速度对所有金属的切削操作有着重要的经济上的影响。

The selection of the correct cutting speed has an important bearing on the economics of all metal cutting operations.

多年研究表明，利用现有的切削理论，已经无法再成十倍的提高切削速度。

The research indicates it is impossible that cutting speed is improved decuple in accordance with present cutting theory.

在铣刀切削工件金属时，铣刀的每条切削刃都象一单独的单刃刀具一样作用。

Each of the cutting edges of a milling cutter ACTS as an individual single-point cutter when it engages with the workpiece metal.

在铣刀切削工件金属时，铣刀的每条切削刃都象一单独的单刃刀具一样作用。

Each of the cutting edges of a milling cutter ACTS as an individual single-point cutter when it engages with the workpiece metal.

切削的原声例句

切削的网络释义

切削 用切削工具(包括刀具、磨具和磨料)把坯料或工件上多余的材料层切去成为切屑,使工件获得规定的几何形状、尺寸和表面质量的加工方法

以上关于切削的英语翻译来自英汉大词典，希望对您学习切削的英语有帮助。