本文为您带来坯场的英文翻译，包括坯场用英语怎么说，坯场用英语怎么说，坯场的英语造句，坯场的英文原声例

本文为您带来坯场的英文翻译，包括坯场用英语怎么说，坯场用英语怎么说，坯场的英语造句，坯场的英文原声例句，坯场的相关英语短语等内容。

坯场的英文翻译，坯场的英语怎么说？

坯场的英语网络释义

坯场的汉英大词典

坯场的英语短语

坯场的英文例句

与已有静电场法相比，类等势场法不仅能获得合理的预制坯形状，通过分析还可以获得其成形过程的合理场变量分布规律。

The reasonable shape of preform and distribution law of field variables in forming process could be obtained by equipotential field method compared to the existent electrostatic field method.

采用ANSYS建立轮胎硫化温度场分析模型，对经过预热和未经预热处理两种情况下的胎坯硫化温度场进行了模拟。

A model was built by using ANSYS to simulate the curing temperature field of two green tires, of which one was preheated and another was not.

在拉速提高的条件下，必须优化结晶器内流场以适应稳定生产的需要，防止气孔、拉漏等铸坯缺陷的产生。

Fluid flow in the mould must be optimized in order to improve the internal and surface quality of the slabs while increasing the casting speed.

建立了圆坯拔长锻造的运动许可速度场与应变速率场。

The kinematically admissible velocity field and strain rate field for extension forging of rounds have been established.

计算出薄板坯在结晶器内温度场分布和变形，在此基础上得到了坯壳生长、收缩的规律。

The temperature flied distribution and deformation in the mould of thin slab were calculated, moreover, the regularity of shell growth and shrinkage was obtained.

并通过不同冷却流道所影响的型坯温度场的比较，揭示了整体均匀冷却在定型模冷却系统设计中的重要意义。

By comparison different temperature field which are affected by the lay-out of cooling section, this paper uncovers the importance of uniform cooling when design cooling section of calibrator.

应用流场计算软件PHOENICS及水力模型，模拟了方坯连铸结晶器内钢液的流场和流动分布。

Using flow field software PHOENICS and water model, this paper describes the flow field of molten steel in continuous casting billet mold.

根据连铸机特点和铸流场特性，在拉坯方向上将整个铸流长度划分为上部计算域和下部计算域。

Based on characteristics of concaster and strand field, the total length of strand along casting direction is divided into two parts - upper and lower calculated part.

可运用此数学模型预报连铸各参数的冶金效果，如铸坯的温度场、液芯长度、凝固壳厚度等。

This model is aimed at forecasting the metallurgical effects of various CC process parameters, such as temperature field, liquid pool deepness and solidification profile.

通过水力学模型实验，在不同水口结构和不同工艺参数的条件下对异型坯进行结晶器流场对比。

Using water model, the flowing distributions based on the different SEN structures and technological parameters in beam blank mould are studied in this paper.

采用水力学试验的方法，对异型坯结晶器内的流场进行研究。

This paper describes the study on the flow field in the beam blank mould by means of the hydraulic experiment.

利用该程序计算了不同拉速及冷却条件下，铜薄板连铸过程中温度场的分布，并分析了拉速、冷却条件对铸坯温度的影响。

This program was applied to calculate the temperature distribution of copper thin-slab continuous casting with different casting speeds and cooling conditions.

对马钢二钢厂小方坯中间包内钢水流动的流场、浓度场和温度场进行了数模研究。

The flow, concentration and temperature fields in a tundish of billet continuous casting are studied.

与普通水缝式结晶器相比，铸坯温度场均匀，坯壳厚度均匀，冷却强度有所提高。

Comparing to the normal water cooling type mold, spray-type mold is more homogeneous in temperature field and in thickness of solidified shell and is higher in cooling intensity.

利用ABAQUS有限元软件对半无头轧制超长铸坯均热过程中的温度场变化进行了数值模拟。

The change of temperature field during the soaking of the slabs used for semi-endless rolling was simulated by ABAQUS finite element software.

采用有限元方法，对某钢厂的重轨钢大方坯连铸机的凝固过程温度场分布情况、坯壳生长规律和凝固率进行了模拟研究。

The finite element method (FEM) model was established to predict the temperature field, shell growth and solid fraction of the heavy rail bloom caster.

可运用此数学模型预报连铸各参数的冶金效果，如铸坯的温度场、液芯长度、凝固壳厚度等。

This model is aimed at forecasting the metallurgical effects of various CC process parameters, such as temperature field, liquid pool deepness...

可运用此数学模型预报连铸各参数的冶金效果，如铸坯的温度场、液芯长度、凝固壳厚度等。

This model is aimed at forecasting the metallurgical effects of various CC process parameters, such as temperature field, liquid p…

可运用此数学模型预报连铸各参数的冶金效果，如铸坯的温度场、液芯长度、凝固壳厚度等。

This model is aimed at forecasting the metallurgical effects of various CC process parameters, such as temperature field, liquid p…

坯场的原声例句

坯场的网络释义

很抱歉，暂无字的网络释义。

以上关于坯场的英语翻译来自英汉大词典，希望对您学习坯场的英语有帮助。