料面英语怎么说

admin2024年11月28日中英词典3070

本文为您带来料面的英文翻译,包括料面用英语怎么说,料面用英语怎么说,料面的英语造句,料面的英文原声例

本文为您带来料面的英文翻译,包括料面用英语怎么说料面用英语怎么说料面的英语造句料面的英文原声例句料面的相关英语短语等内容。

料面的英文翻译,料面的英语怎么说?

  • charge level

料面的英语网络释义

以文本方式查看主题 ... charger ①充电器,充电设备 ②加液器 charger reader device 充电器读出装置 charge sensitive amplifier 电荷灵敏放大器 ...

... LUN逻辑单元号码 SL料面,料线(高炉内的) UMich密西根大学-安娜堡分校 ...

料面的汉英大词典

料面[liào miàn]

  • charge level

料面的英语短语

  • 装料面[核]charging face

  • 姜料面包ginger bread

  • 意大利圣诞果料面包Stolen

  • 纺织原料面料Textile Raw Materials and Fabrics;Textile material&fabric;Textiles Raw Materials;Textiles Raw

  • 料面探测器charge level detector

  • 塑料面盆plastic basin

  • 压料面DieBinderWrap

  • 料面指示器bin-dicator

料面的英文例句

下降分为二部分对新修正。

The burden descent is divided into two parts for revising new burden surface.

粉条末、五等熬制而成。

At the end of five material surface and vermicelli etc which.

胶带承和非承料面均应设置清扫装置。

Bearing surface and non-bearing surface of rubber belt shall be equipped with cleaning device.

首先,充分利用高炉生产过程检测信息建立温度场。

Firstly, the measuring information of BF process is utilized to establish the temperature field of burden surface.

通过对各类影响分布的测量参数的信息融合获取料面特征,建立了高炉分布模型。

A burden surface distribution model is built by fusing the information of all operation parameters that affect the burden distribution characteristics.

拉延工艺设计主要包括冲压方向调整、压和工艺补充部分的设计以及拉延筋布置等工作。

The drawing process planning was mainly referred to the adjustment of press direction, the design of binder face and addendum as well as the layout of draw beads.

操作时采用空线法(从炉顶打水),回收高炉煤气,不安装特殊探尺,用风量判断料面行程。

During lowering charge level with water spraying into the blast furnace, the gas is recovered and the charge level is judged by the blast volume not by special stock rod.

此模具的压料面为曲压边,并利用DYNAFORM分析板的起皱趋势,确定拉伸筋的位置。

The position of drawing rib was determined according to the analysis on the wrinkling trend of sheet bar made by DYNAFORM software.

此模具的压为曲压边,并利用DYNAFORM分析板的起皱趋势,确定拉伸筋的位置。

The die was curved surface held down. The position of drawing rib was determined according to the analysis on the wrinkling trend of sheet bar made by DYNAFORM software.

首先建立零件的拉延模型,从冲压方向、工艺补充、压料面、坯初始形状等方进行设计分析。

Firstly, the stamping model of the part is built, and the design is focused on drawing direction, shape of addendum and blank-holder surface, initial shape of blank, and so on.

系统软件采用vc编制,主要包括了通讯模块、主监视模块、透气性模块、烧结块软化点模块、料面分布模块等。

The system software, developed by VC, comprises communication module, main monitoring module, permeability module, agglomerate Softening-Point module and charge level module.

首钢2号高炉降料面喷补炉衬后送风恢复炉况,送风第2天炉况基本恢复正常,第7天焦炭负荷加重到5.0以上。

Shougang No. 2 BF blows for recovery after spraying painting, furnace condition gets right on No. 2 day and coke burden aggravates upwards 5.0 on No. 7 day, furnace condition recovery is rapid.

介绍了攀钢烧结厂为完善点火制度在铺平、低负压点火、提高点火强度、点火器种类的选择等方所作的研究与应用。

The research of ignition system in sintering machine, including smoothing raw material layer, low negative pressure ignition, igniting intensification, selection of igniting device, is introduced.

马来西亚早餐- - -一碗热腾腾的,配有鸡蛋,蔬菜和调味

Malaysian breakfast - a hot bowl of Mee - noodles mixed with egg, vegetable and tasty spices.

马来西亚早餐——一碗热腾腾的,配有鸡蛋,蔬菜和调味

Malaysian breakfast — a hot bowl of mee-noodles mixed with egg, vegetable and tasty spices.

这段时间日本媒体纷纷曝鸠山早年少为人知的具有艺术气质的一

Japanese media have been digging up video of Hatoyama's formerly less-known artsy side.

斜楔插板上的斜楔推动废边的三角槽一侧,使板向前运动,达到板定位和自动送的目。

The surface of inclined wedge pushes the triangle side of the waste and makes the plate move ahead, thus meeting the re.

针对薄层罩的特点 ,介绍了石安高速公路罩沥青混合级配的选择方法。

To counter the feature of overlaying in thin layer , this paper introduces the choice of asphalt mixture gradation used in the covering of pavement of Shi-An Espressway.

自动靴定型机可视鞋积大小调整所需行程深度,依材质特性调整需承受力、下速度、定型时间、定型温度、下刀顶压力,使鞋定型翘度更加完美。

Automatic upper moulding machine can adjust depth according to upper proportion. Change pressure, speed, time, temperature, etc according tomaterial. The upper can get best effect.

分别从胶砂强度值、胶砂抗压强度比和比强度指标三方分析磨细锶渣作为水泥掺合的活性效应。

Effects of the activity of ground-strontium slag as cement admixture were analyzed from three aspects: mortar strength value, compressive strength ratio of mortar and specific strength indicators.

凸台和互连焊点的重熔是阵封装的关键技术之一。

The manufacture of solder bump is one of the key technologies for area array packaging (AAP).

根据瑞士31条路段的经验,用沥青混合能够修复与补强水泥混凝土路

Capabie reparation & reinforcement of cement concrete roadface with asphalt mixture cover according to experience of Swiss'31-line section of highway.

介绍了激光重熔在阵列封装钎凸点成形中的研究进展,并且对PBGA共晶钎球激光重熔进行了工艺研究。

Research status of laser reflow on solder bump forming of area array packages are introduced, and experimental analysis on laser reflow of PBGA solder ball is performed.

实践证明在该机床上电解加工方毛坯,加工出的叶片经专用量具检测,叶片型精度符合要求。

In practice, square stock was electrochemically machined to form a blade surface, and checked the blade by a special measuring device, satisfactory results were obtained.

生产的食用酵母浸膏可用在肉食水产品、家用调味、小吃食品、方便、保健食品中作增鲜剂、风味改良剂和营养强化剂。

The produced edible yeast extract could be used as nutrition intensifying agent, flavor modifying agent and fresh strengthening agent in snack food, health food and aquatic products etc.

电容式传感器理想用于液监测和给监测。

Capacitive sensors are ideal for level and feed monitoring.

本文以高粘性沥青为结合,主要对以下四方内容进行了研究:首先,用有限元方法计算分析应力吸收层防治反射裂缝效果。

Based on high viscous asphalt, this paper mainly studied the following four topics: Firstly, FEM (finite element method) was used to analyze the effect of stress absorbing layer.

螺旋托辊:用于清除输送带上的粘,保持带清洁。

Spiral roller: Used to remove the sticky material on the conveyor belt, to keep an area clean.

螺旋托辊:用于清除输送带上的粘,保持带清洁。

Spiral roller: Used to remove the sticky material on the conveyor belt, to keep an area clean.

料面的原声例句

料面的网络释义

料面 料面是汉语词汇,拼音是liào miàn,解释为毒品海洛英的俗称。

以上关于料面的英语翻译来自英汉大词典,希望对您学习料面的英语有帮助。

返回列表

上一篇:料食英语怎么说

没有最新的文章了...