本文为您带来板带的英文翻译，包括板带用英语怎么说，板带用英语怎么说，板带的英语造句，板带的英文原声例

本文为您带来板带的英文翻译，包括板带用英语怎么说，板带用英语怎么说，板带的英语造句，板带的英文原声例句，板带的相关英语短语等内容。

板带的英文翻译，板带的英语怎么说？

板带的英语网络释义

板带

板带

板带的汉英大词典

板带的英语短语

板带的英文例句

板带生产在国民经济中起着重要的作用。

Plate and strip production plays an important role in national economy.

平直度是评价金属板带质量的重要指标之一。

Flatness is one of the principal factors evaluating the metal plate and strip.

板形控制技术是现代板带生产中的核心技术。

The shape control technology is the key technology in the modern strip production.

介绍了板带轧制动态理论的研究现状和应用结果。

The present status of research and application result on dynamic theory of strip rolling were introduced.

液压agc是现代板带厚度控制的关键技术之一。

Hydraulic AGC is one of the key technology of modern strip thickness control.

板带材在国民经济各部门中具有广泛而重要的应用。

In every department of national economy, plate and strip has extensive and important application.

冷轧板带的产品厚度精度是其一个重要的质量指标。

The accuracy in gauge of the cold rolling strip is one of the most important quality index.

该控制原理同样适用于其它大型高速精密板带轧机。

The controllable theory can be also applied to other large high-speed premise plate mills.

在板带递送机辊缝变形区中，板带表面容易发生塑性变形。

Plastic deformation is easy to occur on the surfaces of plate and strip in the roll gap of pinch mill.

该研究表明，弹塑性边界单元法用来分析板带轧制是满意的。

The research shows that the elastoplastic BEM is satisfactory for analyzing flat rolling of plate and strip.

板带的最终组织中含有残留的热轧织构，织构组分较杂且弱。

The retained hot rolling structure and weak texture in final strip product are observed.

变刚度系数是板带连轧机厚度自动控制系统中一个重要的参数。

Mill modulus control (MMC) is one of important methods in the automatic gauge control (AGC) systems of strip rolling mills.

研究了防盗盖用3003 - H 16铝合金板带材的生产工艺。

The process of3003-H16aluminium alloy sheet for lid is studied.

介绍冷轧板带退火工艺的特点，探讨柳钢冷轧板带退火的设备选择。

The characteristics of cold-rolled strip annealing practice have been introduced, and the equipment selection of old-rolled strip annealing has been discussed.

该研究结论对制定与完善板带轧制规程、提高板形质量具有重要意义。

The study results have significance for the setup and improvement of rolling regulations and plate shape quality.

本文在计算板带轧制中的参数时应用了初始应力的弹塑性边界单元方法。

In the paper, the elastoplastic boundary element method (BEM) of the initial strain is worked at calculating parameters of flat rolling of plate and strip.

冷却集管及喷嘴的结构和安装对于热轧板带层流冷却效果有重要的影响。

The structure and installation of the pipe nozzles have important effect on the cooling process of hot rolled strip and plate.

分析结果表明，轧制变形使板带晶粒细化，抗拉强度增加，伸长率降低；

The results show that the rolling will make the grain fine, the tensile strength increased and the prolongation rate reduced.

对板带材表面缺陷图像的识别与分类进行研究具有重要理论及经济价值。

The board strips surface defects inspection and classification can dedicate not only to the theory but also to the economical values.

研究了热轧板带厚度控制中轧制力预报环节的局部逼近神经网络实现方法。

This paper presents an artificial neural network model to predict the rolling force to control hot-rolled strip strip thickness.

板形平坦度自动控制系统是板带材冷连轧机过程控制系统的重要组成部分。

Flatness automatic control system is an important part of process control system of sheet or strip continuous cold rolling mill.

结果表明，半固态连续铸轧技术可以提高板带的塑性加工性能，细化晶粒。

The result shows that the technology of semi-solid strip casting and rolling can improve plastic processing property and refine grain.

板带轧机板形计算理论的研究是一个具有重要理论价值和实际意义的课题。

The study on strip shape computational theory of strip mill is a subject which has important theoretical value and practical significance.

不均匀压缩下金属板带面内弯曲成形是一种不同于传统塑性弯曲的先进弯曲方法。

In-plane bending of a strip metal under unequal compressing with conical rollers is a kind of advanced bending processes.

详细讨论了基于有限元分析的钢筋混凝土和预应力混凝土楼板的板带截面设计方法。

The section design method of slab strips for reinforced concrete and post tensioned concrete slabs is discussed in detail.

在设计、改造板带轧机，以及控制和改善板形时都要对轧机辊系弹性变形进行考虑。

Roll elastic deformation must be considered when plate rolling mill is designed and rebuilt and plate shape is controlled and improved.

这里详述了镁合金板带的双辊铸轧技术进展情况，概述了镁合金板带的其他生产工艺。

The new progress in magnesium strip roll casting is dwelled on, other magnesium plate and strip producing technologies are summarized in this part.

在整个变形区内板带边缘和中心的纵向相对应变较小，可以防止边缘出现起皱、鼓包。

The relative longitudinal strain between the strip edge and strip center is very small in the whole deformed zone, which can prevent appearing crinkling and bloating.

板形识别与板形控制技术的智能化实现是现代板带轧机控制中的世界前沿性研究课题。

As far as the technique is concerned, the key scientific problem in the world is pattern recognition and the realization of shape intelligent control.

本文提出了一种转动结构用于铜合金冷轧板带残余应力检测以及面内形变的测量方法。

In present paper a new rotating-structure was introduced to detect local residual stress and in-plane deflection in thin cold-rolled sheet of copper alloy.

板带的原声例句

板带的网络释义

板带 板带是一个建筑学用语。建筑上将带状现浇板称为板带。位置不同配筋不同。加强带，后浇带都属板带。

以上关于板带的英语翻译来自英汉大词典，希望对您学习板带的英语有帮助。