本文为您带来槽道的英文翻译，包括槽道用英语怎么说，槽道用英语怎么说，槽道的英语造句，槽道的英文原声例

本文为您带来槽道的英文翻译，包括槽道用英语怎么说，槽道用英语怎么说，槽道的英语造句，槽道的英文原声例句，槽道的相关英语短语等内容。

槽道的英文翻译，槽道的英语怎么说？

槽道的英语网络释义

槽道的汉英大词典

槽道的英语短语

槽道的英文例句

本文将这种方法应用于力锁合凸轮和槽道凸轮。

This method has been applied to force sealed and groove sealed CAM mechanism.

适合管道，槽道，电缆沟，架空，直埋等敷设方式。

Suitable for pipe, channel, cable trenches, aerial, direct burial and so on.

本文介绍二维分岔槽道内非牛顿流体流动的有限元分析。

This paper presents finite element analysis of non-Newtonian fluid flow in 2-D branching channel.

为实现最优控制的槽道湍流直接数值模拟奠定了重要基础。

Present study provides a necessary platform to realize the optimal control of turbulent channel flow by direct numerical simulations.

对不可压缩边界层或平面槽道流，还会出现典型的三维结构。

For incompressible boundary layer or plane channel flow, typical three-dimensional structures would appear.

数值模拟了槽道进气角和转折角对开槽叶栅流场特性的影响。

The effect of slot inlet Angle and turning Angle on flow field characteristic of cascade with slot was studied numerically.

光纤槽道能承受低温试验。 试验后，试样不产生裂痕或脆断；

After low temperature test, the sample does not appear breaks or brittle fracture.

同时，本实验还对不同高度和不同扩张方式的槽道分别进行研究。

What's more, channels with different height and expand Angle are also studied.

探讨了轴向槽道热管垂直安装时热源位置的不同对热管工作特性的影响。

The effect of heat source location on the heat transfer of an axially grooved heat pipe was investigated.

用谱方法对等温反应槽道湍流流动中标量关联量输运进行了三维直接模拟。

The direct numerical simulation (DNS) of incompressible reacting turbulent flows was carried out using a spectral method.

文中重点论述液氧在垂直板翅槽道中两相流压力降及传热的计算模型与程序。

The paper primarily deals with the calculating models and the programmes of two-phase pressure drop and heat transfer of Lox in vertical plate-fin channels.

其中热管吸液芯分别采用普通不锈钢丝和反向槽道毛细结构，分析其工作性能。

The performance of the wick is analyzed with two wicks which is normal wire-mesh screen and reversed groovy capillary structure.

光纤槽道能承受规定条件下的老化、冲击试验。试验后，试样不产生裂纹或脆断；

After the stated conditions of aging, impact test, the sample doesn't crack or brittle fracture.

本文对空气和水流过烧结青铜颗粒水平多孔槽道表面上的对流换热进行了实验研究。

Forced convection heat transfer of water and air in plate channels filled with sintered spherical particles was investigated experimentally.

文中介绍了用网络法计算油流槽道内速度分布与用有限差分法计算线饼内温度分布。

The velocity distribution in the oil ducts is estimated by network method and temperature distribution in the winding is estimated by the finite difference method.

并得到了微尺度槽道的尺寸、结构形状和流体流动均匀性对其流动和换热的影响规律。

It is also concluded that the dimensions, structures and flowing regularity have affections on heat transfer and fluid dynamic characteristics in micro channel...

水在微尺度槽道中单相流动和换热的研究，是通过对其流动阻力和换热强度等的实验进行的。

Experiments to investigate the heat transfer and fluid dynamic characteristics of water flowing through micro channels were conducted.

对新型高剪切均质机关键部分定转子间隙区、定子槽道区、转子槽道区的内部流场进行了理论分析。

Last, the flow fields of the key parts of the new-type high-shearing homogenizer, the clearance between stator and rotor, the troughs of stator and the troughs of rotor, were analyzed in theory.

为了找到一种理论最优的控制方案，本文以槽道湍流为例对壁湍流减阻的最优控制方案进行了相关研究。

To find an optimal control strategy in theory, the optimal control in turbulent channel flow has been studied by direct numerical simulations in present paper.

考察了催化剂涂层的配比、反应温度、水醇比、进料速度、反应时间对甲醇重整微槽道反应器性能的影响。

The effects of catalyst composition, reaction temperature, space velocity, molar ratio of methanol to water, and reaction time on the performance of the microchannel reactor were investigated.

对高热流密度芯片的冷却要求进行了分析，采用有限元方法对微槽道冷却热沉的传热性能进行了数值模拟。

The finite element method is then used to numerically simulate the heat transfer performance of microchannels cooling heat sink.

气流进入叶栅槽道后，在叶栅型面作用下，气流发生偏移，空气中的沙尘在贯性力作用下被收集在型槽中。

Air flow is offset under actions of the blade-lattice surfaces after entering the blade-lattice air passages, and dust in air can be collected in the grooves under actions of inertia force.

作者经过计算和分析，说明压气机叶栅流中主要的相互作用形式是叶栅槽道中激波和湍流附面层的相互作用。

It is shown by calculation and analysis that the main form of the interaction in compressor cascades is the interaction between shock wave and turbulent boundary layer in channels.

当槽道进气角较小时，由于槽道进出口两端静压差减小，槽道对气流的加速作用下降，射流的作用效果也将降低。

When the slot inlet Angle decreases from the optimal point, the accelerating effect of slot is reduced due to less differential static pressure, thus the effect of jet would also be reduced.

较系统地论证了我国首制高性能双体滑行艇的主尺度选择与线型设计，列出了槽道参数确定及设计与演变中应考虑的因素。

This paper demonstrates the selection of main dimensions, design of hull lines and determination of channel parameters for a high-speed twin-hulled planing boat, which is first built in China.

对三种微槽平板热管的传热性能进行了实验研究，分析了充液率、工质的种类、槽道形状对微槽平板热管传热性能的影响。

The performance of three kinds of flat miniature heat pipes is studied experimentally and the factor such as the charging ratio, working fluid and groove structure are analyzed.

最后用方截面管流中有关二次流的实验结果对模型进行鉴定。结果表明，给出的模型在槽道流动和方截面管流中都获得了满意的结果。

Then the normal Reynolds stresses in square duct flow are calculated using the new model and coefficient functions, the results are consistent with the experimental data.

成形品是由流入融化树脂的浇口、导入模槽的流道与产品部份所构成。

Molded into the melted resin from the gate, into the flow channel module slot part of the composition of the product.

采用微磨料气射流加工技术(MAJM)，对普通硅酸盐玻璃进行微流道槽加工。

The micro abrasive jet machining (MAJM) technology was used to make micro channels on the glass.

采用微磨料气射流加工技术(MAJM)，对普通硅酸盐玻璃进行微流道槽加工。

The micro abrasive jet machining (MAJM) technology was used to make micro channels on the glass.

槽道的原声例句

槽道的网络释义

槽道 槽道，汉语词语，拼音是cáo dào，意思是牲口槽；犹规矩。

以上关于槽道的英语翻译来自英汉大词典，希望对您学习槽道的英语有帮助。