本文为您带来流充的英文翻译，包括流充用英语怎么说，流充用英语怎么说，流充的英语造句，流充的英文原声例

本文为您带来流充的英文翻译，包括流充用英语怎么说，流充用英语怎么说，流充的英语造句，流充的英文原声例句，流充的相关英语短语等内容。

流充的英文翻译，流充的英语怎么说？

流充的英语网络释义

流充的汉英大词典

流充的英语短语

流充的英文例句

容控箱收集净化、过滤后的下泄流，同时它给上充泵提供净正吸入压头。

The volume control tank collects the purified, filtered letdown fluid and provides a suction reservoir and head for the charging pumps.

过充保护，过放保护，过流保护，短路保护。

Overcharge protection, over-discharge protection, over current, short circuit protection.

采用该方法对桑塔纳轿车前保险杠注射模浇注系统进行优化设计后，在保证熔体充模的情况下，流道截面有较大的减小。

Using C MOLD software for injection molding CAE, it has been proved that the radius of runner which was calculated by the new method can be reduced obviously.

从理论上分析了动态熔体流动过程，为研究聚合物熔体的动态充模过程提供流道系统压力降。

Dynamic flow process of molten polymer was studied in theory to offer a pressure drop input in the dynamic molding process of molten polymer.

编制调试了三维充型过程的流场、温度场耦合数值模拟计算程序，能够较好地数值计算模拟铸件三维充型过程。

Three-dimension fluid field coupled with temperature field numerical simulation program was debugged. And worked out, three-dimension mold filling course can bitterly numerical simulated.

针对锂离子蓄电池在充放电过程中容易出现的过充、过放、过流、过温问题，设计了基于软硬件保护的锂离子蓄电池保护电路。

According to the problems in charging and discharging process of lithium-ion battery, a kind of protection circuit based on software and hardware was designed.

对稳定铺展流、失稳流、射流和绕流等各种充模现象进行了描述、分析，并提出了各种流动行为的判别准则。

The various mold filling phenomena such as steady spreading flow, unsteady flow, jet flow, and surrounding flow, etc. were described and criterion for different flow behaviors also proposed.

该机径向推流能力强、充氧量高、混合搅拌效果好，特别适宜于表曝型氧化沟污水处理工艺。

It's very efficient at propelling water radially, aerating and mixing the water. The invert umbrella aerator is especially suited for surface aeration oxidation ditch process.

同时计算得到了静止式气波制冷机内部流场的速度、压力分布，捕捉到了射流“卷吸”和充排气的掺混现象。

The simulation obtains while process of fluidic attachment and switch and distribution of velocity and pressure of flow field.

采用SPH和FEM耦合的方法，考虑流固耦合效应的影响，对典型矩形薄壁充液容器的跌落过程进行数值仿真。

Smoothed particle hydrodynamics (SPH) method coupled with finite element method (FEM) is used to simulate the dropping of rectangular fluid-filled tank.

生产的产品均具备完善的过充，过放，过温，过流，过压保护功能，性能稳定，安全可靠。

Products all have sound overcharge, over discharge, over-temperature, over current, over voltage protection functions such as stable performance, safe and reliable.

提高充型过程数值模拟的计算速度是流场模拟的一个研究热点。

Computing speed of numerical simulation on filling process of casting is a focus and difficulty in the study of this field.

实际生产表明，改进后的内浇道形成了较理想的流态，使模具温度分布均匀，同时消除了铸件充型远端的冷隔缺陷。

The production verifies that the desirable filling can be formed in the optimized ingate, which plays the uniform temperature distribution in the die and eliminates the cold shut in fi...

采用这两种显示方法来显示蜡模或铸件在充型过程中的流场，可以直观地观察流场中物理量的分布情况。

Using these methods, the users can easily observe the distributions of the physical quantities in the 3 dimensional flow field.

磁体电压、磁体电流及直流母线电流仿真与实验波形吻合较好，所应用的斩波器数学模型及其控制方法能实现对超导磁体快速稳定地充、放电和续流。

The experimental and simulative waveforms of magnet current and DC bus current inosculate well, which indicates the validity of the proposed mathematical model of chopper and its control method.

微流控芯片也被用于研究骨髓间充质干细胞的培养及相应的成脂肪细胞和神经细胞的分化。

The results show that even though the culture of stem cells can be done with different substrates, the differentiation is more critically depending on the cell-material adhesion.

微流控芯片也被用于研究骨髓间充质干细胞的培养及相应的成脂肪细胞和神经细胞的分化。

The results show that even though the culture of stem cells can be done with different substrates, the differentiation is more critically depending on the cell-material adhesion.

流充的原声例句

流充的网络释义

流充 郭沫若 《反正前后》第一篇：“请愿结果失败了， 清 廷把 温世森 逮捕了，流充到 新疆。”

以上关于流充的英语翻译来自英汉大词典，希望对您学习流充的英语有帮助。