本文为您带来渗渗的英文翻译，包括渗渗用英语怎么说，渗渗用英语怎么说，渗渗的英语造句，渗渗的英文原声例

本文为您带来渗渗的英文翻译，包括渗渗用英语怎么说，渗渗用英语怎么说，渗渗的英语造句，渗渗的英文原声例句，渗渗的相关英语短语等内容。

渗渗的英文翻译，渗渗的英语怎么说？

渗渗的英语网络释义

... 心若相依_Lily 嘴巴寂寞的rae 渗渗Mia ...

渗渗的汉英大词典

渗渗的英语短语

渗渗的英文例句

本文研究了20钢和45 钢的碳硼复合渗渗层组织及耐磨性能。

The structure and wear resistance of layers of C-B double cementation of steels 20 and 45 have been studied.

研究了在不同气氛下进行离子渗氮对TC 4钛合金渗氮层的组织与性能的影响。

The effect of the atmosphere on the structure and properties of ion nitriding layer of alloy TC4 was investigated.

介绍了三种主要的浸渗方法和三种浸渗剂的特性以及这项技术的使用效果。

Three chief methods of impregnation and the characteristic of three impregnation agents and their effects are introduced.

找出了高速大功率柴油机曲轴在自然放置状态下的渗氮畸变规律，分析了曲轴的形状及渗氮工艺参数对曲轴畸变的影响。

The distortion law of high-speed diesel crankshafts during nitriding was studied. The influence of crankshafts shape and nitriding process parameters on the distortion was analyzed.

建议对这种钢在渗氮前先机加工和热处理，因为渗氮后没有剥落并不需要更多的加工。

It is recommended that these steels be machined and heat-treated before nitriding, because there is no scale or further work necessary after this process.

根据渗沥液产生量计算公式推导出渗沥液处理规模、渗沥液调节池容积的计算公式。

The calculation formulas of leachate treatment scale and volume of regulating tank were conducted based on the calculation formula of leachate production.

阐述了降雨量、前期土壤水分含量和下渗历时与水分下渗深度的关系。

The relations between rainfalls, contents of soil water before rainfall, time of infiltration and depth of infiltration were described.

特点：渗速快、渗层深、质量稳定。

Features: Fast carburizing, thick carburizing layer, stable quality.

本实验目的是观察烧冲复合伤后液体治疗与心钠素（ANF）、血渗与尿渗变化的关系。

Thirty dogs were used to study the relationship between fluid therapy and some parameters (ANF, plasma osmotic pressure and urinary osmotic pressure) after burn—blast combined injury.

我们还对铸渗质量较好的铸渗试件进行了观察和分析，发现铸铁渗铬合金层与母材结合良好，呈冶金结合。

By observing and analyzing the casting test piece, we have found a metallurgical integrating layer that is made up of chromizing cast-iron alloy layer.

化学热处理的主要有渗碳、渗氮、渗金属的方法。

The chemical treatment main method has the cementation, Azotize, infiltrates the metal.

1986年，我们共同设计制造程序自动控制真空氮渗设备和研究真空脉冲渗氮工艺。

In 1986, we designed the procedure auto-control vacuum nitriding furnace and studied the pulse vacuum nitriding processes.

将下渗曲线与下渗率流域分配曲线结合起来，从而构成流域产流计算的数学模型。

The mathematical model was established by combining the infiltration curve with the areal distribution curve of the infiltration capacity within the basin.

采用预氧化两段式气体渗氮工艺，充分利用预氧化的催渗作用，达到缩短渗氮工艺周期的目的。

The paper introduces the preoxidation two periods nitriding technology. The technology makes use of the catalysis of preoxidation enough to shorten nitriding technology time.

对于低渗、特低渗储层渗透率恢复值可达到78%和85%。

Permeability recovery reached 78% and 85% for low and very low permeability cores respectively.

设计了专用浸渗罐，摸索出了合适的浸渗工艺，成功地运用浸渗技术解决了大型薄壁铝铸件的渗漏问题。

By designing a special impregnating tank, this paper has found out the proper impregnating technology for solving leakage problem of large thin-wall aluminium alloy casings.

从材料的选择、铸渗工艺、及铸渗应用等方面，介绍了国内外运用铸渗法制备钢铁基表面复合材料的新进展。

New development on the fabrication of metal-matrix surface composites with cast infiltration was introduced from the angles of material selection, infiltrating techniques and application.

本文阐述了浸渗技术的浸渗方法、常用的浸渗剂和浸渗工艺，介绍了真空压力浸渗装置的组成和主要结构。

The method of impregnation and penetrating agents and the penetrating process were described in the paper. The composite structure of device that vacuum pressure penetrating were also introduced.

氮碳共渗后快冷，在渗层获得含氮碳的马氏体组织。

Rapid cooling after nitrocarburizing, martensite structure is obtained at the diffusion layer.

同时还研究了渗钼层的显微组织、渗钼层浓度分布。

Microstructure and concentration distributions of molybdenum in the layer were studied also.

测定了不同工艺条件下获得的浸渗层深度和浸渗层显微硬度的分布。

The depth and microhardness distribution of alumetizing layer obtained on different technical conditions were measured.

研究了复合渗镀机理、渗镀层成分和元素分布、渗镀层相结构以及渗镀层与基体的接合机理。

The composition distribution, the phase analysis of the depositing layer and joint mechanism of the depositing layer to ceramic substrate are studied.

与常规渗硼渗层相比，微波渗硼的渗层硬度高、耐磨性好。

The hardness of microwave boriding is higher than that of conventional boriding.

用透射电镜研究了稀土催渗离子渗氮层中的晶体缺陷。

The lattice defects in the plasma - nitrided layer have been studied by TEM.

介绍了铜合金在渗剂粉末中高效渗硅，获得无孔的渗硅层。

A siliconized nonporous layer on copper alloy may be obtained by efficient siliconizing in powder mixtures.

文章对换热器的不同保护方法进行了介绍，重点讨论了渗铝、渗锌两种方法。

The different methods for the corrosion protection of heat exchangers were discussed and aluminum diffusion and zinc diffusion processes were high-lighted.

探讨堤防透水堤基处理中，采用压渗及排渗控应遵循的原则及如何确定相关的设计指标。

This paper discusses how to handle the seepage foundation for dykes, and gives design index concluded from pressure percolation and standard for seepage control.

探讨堤防透水堤基处理中，采用压渗及排渗控应遵循的原则及如何确定相关的设计指标。

This paper discusses how to handle the seepage foundation for dykes, and gives design index concluded from pressure percolation and standard for seepage control.

渗渗的原声例句

渗渗的网络释义

渗渗 渗渗是汉语词汇，拼音是shèn shèn，解释为寒冷貌。

以上关于渗渗的英语翻译来自英汉大词典，希望对您学习渗渗的英语有帮助。