本文为您带来火花放电的英文翻译，包括火花放电用英语怎么说，火花放电用英语怎么说，火花放电的英语造句，

本文为您带来火花放电的英文翻译，包括火花放电用英语怎么说，火花放电用英语怎么说，火花放电的英语造句，火花放电的英文原声例句，火花放电的相关英语短语等内容。

火花放电的英文翻译，火花放电的英语怎么说？

火花放电的英语网络释义

3.1.66 火花放电(spark discharge)： 电流通过空气间隙的传递，与直接接触一个电源相反，它需要足够高的电压来电离空气。

气体放电的基本过程放电（ Discharge )击穿 ( Breakdown )闪络 ( Flashover )火花放电 (Sparkover)电弧 (Arc) 汤逊放电理论外界电离因子阴极表面电离气体空间电离气体中的自由电子电场中加速碰撞电离电子崩（α 过程）正离子阳极...

... 输入功率 input power 火花放电 disruptive discharge 锤式破碎机 hammer breaker ...

电机工程专业英语词汇翻译 ... 无声放电discharge， silent 火花放电discharge， spark 静电放电discharge， static ...

火花放电的汉英大词典

火花放电

• spark discharge

火花放电的英语短语

火花放电的英文例句

火花放电的地方千万不能有明火。

Open fires are not allowed in places where there are spark discharges.

闪电是常见的对流层大气火花放电现象。

Lightning is a common phenomenon of spark discharge of the air in the troposphere.

它可把火花放电频率控制在允许范围内。

It may limit the amount of sparkover to an acceptable rate .

大量静电荷可能在床内积聚而引起火花放电。

Large static charges may build up in the bed causing spark discharges.

对检测电火花放电状态的阀值比较法作了改进。

The threshold comparative method in detecting electrospark discharging status is improved.

概述了虚火花放电的特性，如工作气压和击穿电压等。

Outlining the characteristics of pseudospark, such as pressure and breakdown voltage.

对电火花表面强化的火花放电原理提出了一定的看法。

Therein, a certain view point is proposed in the paper, about the spark discharging principle on electrosparking surface to be strengthened.

如成型研磨、CNC、线切割、火花放电及铣床加工。

If model to grind, the CNC, line incise, the spark turn on electricity and the miller process.

介绍了用脉冲线加速器作驱动电源产生高压虚火花放电的实验。

The experiment result of a high voltage pseudospark discharge driven by a pulse line accelerator is presented.

简介静电电晕放电、刷形放电、火花放电的特点及静电引燃能量。

This paper gives a brief introduction about characteristics of electrostatic discharging, brush discharging, spark discharging and the igniting power of electrostatic.

这种方法采用电化学氧化处理结合溶液中高电压下的火花放电处理。

This method combines the electrochemical oxidation with a high voltage spark treatment in an aqueous electrolytic bath.

结果表明，交流火花放电比脉冲直流火花放电能更有效地转化甲烷。

The methane conversion was carried out using AC spark discharges and pulsed spark discharges.

紫铜电极相比石墨电极能有效避免拉弧现象，产生稳定的电火花放电；

The copper dressing electrode is preferred to plumbago one as it will result in unstable discharge between the two electrodes.

石英玻璃释放出的氧气使管内气体的高频火花放电颜色由紫蓝色变为绿色。

The oxygen released from the quartz glass envelope changes the color of the gas under high frequency spark discharge from indigo into green.

试验表明该装置体积小、质量轻、引弧能力强，实现了无火花放电器引弧。

The volume of the unit is small and the weight is light and the starting arc is strong. The starting arc of not spark is realized.

但当振幅大于放电间隙时，硅与工具电极会产生直接撞击，火花放电机率下降。

The reasons are that:the larger amplitude, the better the chip removal, the lower the short-circuit rate, the higher the discharge rate.

在此基础上设计了电火花放电点位置检测仪，并对其硬件及软件结构进行介绍。

At last, the EDM spark locations detector "s hardware and software structures are discussed on the basis of electromagnetic measurement method."

分析了颗粒复合对氮化硅基陶瓷复合材料的火花放电加工性及切削性能所起的作用。

The effect of particles on the electrical discharge machining (EDM) and cutting property of silicon nitride-based composites was analyzed.

考察了激光取样、辅助火花放电电压、电极尖端距离等条件变化时对分析结果的影响。

The influence of laser sampling, auxiliary spark discharge voltage, and electrode point gap on analytical results was examined.

阻尼电阻r 6：对火花放电电流起缓冲作用，并阻尼高压输出回路中lc分布参数引起的寄生振荡。

Buffer resistance R6: playing buffer effect on spark discharge current and hindering. The parasitic vibration brought by LC distributing parameters of high-voltage output loop.

研究了各种实际金属模具中裂纹电磁热止裂后的修复技术，如电火花放电熔焊搭桥、强化堆焊、刷镀等；

The techniques for repair are studied after crack arrest in metal dies using electromagnetic heating, such as electrical spark melt joining, reinforced build-up welding and brush electroplating.

讨论了单位长度伸长接地体的冲击特性真型试验方法，给出了冲击火花放电特性和伏安特性的试验结果。

This paper discusses a test method for impulse characteristic of real extended grounding electrode in unit length and gives some experimental results.

研究了电火花放电间隙状态判别电路，选择恰当的正常火花放电、电弧放电及空载比例，确定较佳伺服进给量。

The recognition circuit for EDM gap state is researched, selecting proper rate between nomal discharge, arc and blank, defining suitable servo feed.

在充满氙气的灯柱中的两个电极之间进行火花放电将产生“电离气体管”，电流通过该管流动，从而导致气体发光。

A spark discharge between two electrodes produces an "ionised gas tube" in the xenon gas-filled lamp piston through which electric current flows which in turn causes the gas to light up.

发现火花放电不仅改变氧化膜的表面形貌结构，还能够促进氧化膜表面硅、氧元素的富积，并使火花放电区域的表面电位正移。

Under the spark discharge treatment, the structure of the anodic layer was significantly changed, the enrichment of silicon and oxygen was enhanced, and the surface potential was ennobled.

目前实际应用的开关管多数工作在火花放电区域(巴邢曲线的右支)，使用的电极材料一般为钨、钼、不锈钢、水银、石墨等。

Most of the switch tubes used presently work in the gas spark region (the right branch of Paschen curve), and are made of graphite and mental such as tungsten, molybdenum, stainless steel and mercury.

超声电火花复合加工实质上就是在普通电火花放电加工的基础上，在工具电极或工件上叠加一个超声振动，以改善放电加工条件。

Virtually, ultrasonic vibration is added to tool electrode or workpiece electrode on the basis of EDM to improve the processing conditions in ultrasonic vibration assisted EDM process.

建立了电火花放电加工的热力学传导模型，通过有限元仿真方法得出具有放电爆炸力的单次脉冲能够明显提高难加工材料蚀除量的结论。

The heat transfer model of the discharge has been established, and the removal rate could be significant promoted because of the explosion with the method of thermodynamic finite element analysis.

建立了电火花放电加工的热力学传导模型，通过有限元仿真方法得出具有放电爆炸力的单次脉冲能够明显提高难加工材料蚀除量的结论。

The heat transfer model of the discharge has been established, and the removal rate could be significant promoted because of the explosion with the method of thermodynamic finite element analysis.

火花放电的原声例句

火花放电的网络释义

火花放电 在普通气压及电源功率不太大的情况下，若在两个曲率不大的冷电极之间加上高电压，则电极间的气体将会被强电场击穿而产生自激导电，这种现象就是火花放电。这种放电过程产生的碰撞电离是沿着狭窄而曲折的发光通道进行的，并伴随着火花和暴烈声。

以上关于火花放电的英语翻译来自英汉大词典，希望对您学习火花放电的英语有帮助。