本文为您带来电弧的英文翻译，包括电弧用英语怎么说，电弧用英语怎么说，电弧的英语造句，电弧的英文原声例

本文为您带来电弧的英文翻译，包括电弧用英语怎么说，电弧用英语怎么说，电弧的英语造句，电弧的英文原声例句，电弧的相关英语短语等内容。

电弧的英文翻译，电弧的英语怎么说？

电弧的英语网络释义

将电极和工件分别接于 电源之负极和正极,当电极和工件快速碰撞接触后,立即提起分开,造成在两者间的空气被电离形成电弧(Arc),此步骤称为起弧.电弧的温度高达55000C,可将工件接合部位的材料和填料同时熔化,并于冷却凝固后接合在一起.

... voltagetime-to breakdown curve 击穿电压时间曲线 voltaic arc 电弧 voltaic cell 伏打电池 ...

电弧的汉英大词典

电弧[diàn hú]

• arc; electric arc; voltaic arc
• 短语:
  • 电弧保护开关 crowbar;
  • 电弧避雷器 arc arrester;
  • 电弧变流器 arc convertor （由直流变交流）;
  • 电弧猝熄 [熄灭] arc-quenching;
  • 电弧等离子区 arc plasma;
  • 电弧等离子体射流喷涂涂层 arc plasma jet spraying coating;
  • 电弧电路 arc circuit;
  • 电弧电位 arc potential;
  • 电弧电压 arc voltage;
  • 电弧电阻 arc resistance;
  • 电弧断开[分离] arc dissociation;
  • 电弧发电机 arc dynamo;
  • 电弧发射机 arc transmitter;
  • 电弧法 arc process;
  • 电弧放电 arc discharge;
  • 电弧放电充气管 gas-filled arc tube;
  • 电弧放电管 arc-discharge tube;
  • 电弧放电蒸镀设备 arc-discharge coating equipment;
  • 电弧干扰 arc noise;
  • 电弧缝焊 {冶} arc-seam weld;
  • 电弧隔板 arc chute;
  • 电弧光 arc light;
  • 电弧光谱 arc spectrum;
  • 电弧焊接工艺过程 arc welding process;
  • 电弧焊接机 arc welding machine;
  • 电弧环 arc ring;
  • 电弧火花加工 arc machining;
  • 电弧火箭发动机 arc-jet engine;
  • 电弧加热器 electro-arc heater;
  • 电弧-接地 arcing ground;
  • 电弧接点 arc contact;
  • 电弧空气（气）刨 arc air gouging;
  • 电弧离解设备 arc dissociation unit;
  • 电弧连锁继电器 arc interlocking relay;
  • 电弧漏过功率 arc leakage power;
  • 电弧炉 arc furnace;
  • 电弧磨损 arc wear;
  • 电弧能 arc energy;
  • 电弧浓缩法 arc concentration technique;
  • 电弧喷镀 {冶} arc spraying; electric-arc spraying;
  • 电弧喷气式发动机 {航空} arc-jet engine;
  • 电弧喷射发动机 arc-jet engine;
  • 电弧漂移 wandering (of an arc);
  • 电弧飘移多层焊次序 wandering block sequence;
  • 电弧破碎 arc drilling;
  • 电弧气氛 arc atmosphere;
  • 电弧气刨清理 carbon arc gouging;
  • 电弧钎焊 arc brazing;
  • 电弧钎接 arc brazing;
  • 电弧切割 (electric) arc cutting;
  • 电弧熔化 arc-melting;
  • 电弧熔炼 electric arc melting;
  • 电弧闪击[闪法; 触放] arc strike;
  • 电弧损失[损耗] arc loss;
  • 电弧特性曲线 arc characteristic;
  • 电弧调节器 arc regulator;
  • 电弧通信系统 arc system;
  • 电弧吸收器 arc absorber;
  • 电弧消电离时间 arc deionizing interval;
  • 电弧压降 arc drop;
  • 电弧阴极 arc cathode;
  • 电弧噪声 arc noise;
  • 电弧振荡器 {电子} arc converter; arc generator; arc oscillator;
  • 电弧整流器 arc rectifier;
  • 电弧钻进 electric arc drilling

电弧的英语短语

电弧的英文例句

电弧形成时，气体快速积累，油迅速流入油枕中。

If an arc forms, gas accumulation is rapid, and oil flows rapidly into the conservator.

静电放电在飞船和云层中形成电弧然后消失。

Static discharges arced from ship to clouds and back.

我们总是用直流(交流)电弧焊机焊收受子。

We used to weld pipes with direct current (D. c) so are welder (ac A. C. welder).

我们总是用直流(交换)电弧焊机焊吸收子。

We used to weld pipes with direct. C are welder a. C. Welder.

电弧焊的焊条是由焊芯和药皮两个部分组成的。

Electrode for arc welding consists of the core and the coat.

手工电弧焊通常是指采用药皮焊条的手工焊接法。

The manual arc welding normally refers to the manual welding using coated electrode.

替换主充电器单位，或可能是其他单位的电弧电晕。

Replace primary charger unit, or could be arcing of other corona units.

然而，有些试行这项技术的工厂却发现产生电弧需要大量电力。

What some pilot plants have shown so far, however, is that a lot of the electricity produced is needed to power the arc.

而弧压调高要依赖电弧，火焰切割是不出现电弧的。

The high pressure and arc will rely on the arc, flame cutting is not appear the arc.

电弧电压：一般认为电源正常输出电压即为切割电压。

Four, arc voltage: generally believe that the power supply is normal output voltage for cutting voltage.

焊接是一个涉及电弧物理、传热、冶金和力学的复杂过程。

Welding is a complicated process in which arc physics, heat transfer, metallurgy and mechanics are involved.

本研究工作对水下焊接电弧物理及焊接冶金的研究有参考价值。

This research is significant and valuable to the study of underwater welding arc physics.

属于拉弧式电弧螺柱焊焊枪，焊接质量好，重量轻，操作方便。

Draw arc stud welding gun makes high welding quality, with light weight and convenient operation.

如果气隙太小，当触点开路时就会形成电弧，并且电流继续流通。

If the gap is too small, an arc may develop when the contacts open and current continues to flow.

碳精棒两根棒的任一根，电流流经该棒形成电弧，如在闪电或焊接时。

Either of two rods through which current flows to form an arc, as in lighting or welding.

当电流一定时，电压的提高意味着电弧焓值的提高和切割能力的提高。

When the current, voltage must be improved means that the improvement of arc enthalpy and cutting capability is improved.

将电弧焊设备上的接地连接尽可能近地连接到将要焊接零件的焊接点上。

Connect the ground connection of the electric arc welding equipment as near as possible to the welding point on the part to be welded.

本文利用等离子体光谱诊断法对水下焊接电弧温度进行了比较系统的研究。

In this paper the temperature of underwater welding arc is investigated systematically by means of spectral diagnostics of plasma.

采用模糊控制技术，实现了电弧电压或短路频率的控制，提高了焊接质量。

Fuzzy control tests of arc voltage and short-circuit frequency are conducted to improve welding quality.

电弧烧伤。由于电极(含接地极)与管子表面之间起弧而产生的局部表面熔化点。

Arc Burns. Localized points of surface melting caused by arcing between electrodes or ground and pipe surface.

爱迪生不是第一个想到用电照明的人；许多年来，笨重的电弧灯就在公共区域和工厂投入使用。

Edison was not the first person to have thought of using electricity for illumination: cumbersome electric arc-lighting had been employed in public Spaces and factories for a number of years.

以氮气滑动弧为例，分析了其在一个周期内电弧电压、电流、电阻和功率的变化特性。

The arc voltage, current, power and resistance of a nitrogen gliding arc in one period were studied.

以氮气滑动弧为例，分析了其在一个周期内电弧电压、电流、电阻和功率的变化特性。

The arc voltage, current, power and resistance of a nitrogen gliding arc in one period were studied.

电弧的原声例句

电弧的网络释义

很抱歉，暂无字的网络释义。

以上关于电弧的英语翻译来自英汉大词典，希望对您学习电弧的英语有帮助。