盈量英语怎么说

admin2024年11月19日中英词典4480

本文为您带来盈量的英文翻译,包括盈量用英语怎么说,盈量用英语怎么说,盈量的英语造句,盈量的英文原声例

本文为您带来盈量的英文翻译,包括盈量用英语怎么说盈量用英语怎么说盈量的英语造句盈量的英文原声例句盈量的相关英语短语等内容。

盈量的英文翻译,盈量的英语怎么说?

  • 盈量

  • Surplus quantity

  • 以上为机器翻译结果,长、整句建议使用 人工翻译 。

盈量的英语网络释义

盈量的汉英大词典

盈量的英语短语

  • 允盈量filling volume

  • 过盈量interference;magnitude of interference;Amount of interference

  • 充盈量filling volume

  • 地盈量范围bound of interference fit tolerance

  • 盈亏平衡产量break-even volume;even volume

  • 现金流量盈余cash flow surplus

  • 变过盈量changeable shrinking range

  • 轴瓦过盈量bearing interference

  • 大过盈量联结Large Interference Joint

  • 盈余质量quality of earnings;ABSDACC;eamings quality

盈量的英文例句

汽车水泵轴承密封圈的密封性能与唇口过盈量密切相关。

The performance of automotive water pump bearing seal is closely related with the magnitude of interference of the sealing lip.

并对车轮车轴应力分布,飞轮离心力对紧固力过盈量的影响作了论述。

The stress distribution on wheel shaft and the effects of flywheel centrifugal force on its tight fit are discussed as well.

讨论了过盈量对模具寿命的影响,提出了几点提高模具寿命的合理化建议。

The effect of the interference on the die life was also discussed in the paper. Finally, some rationalization proposals were put forward for improving the die life.

对管接头结构设计、过和装配间隙等参数选择、防渗漏等进行了较系统地研究。

The parameter selection and permeability-proof for structure design, interference magnitude and assembly clearance of the couplings with the tubing were also studied systematically.

用有限元法对具有不同过的加强箍对离心机转鼓内应力的影响进行了分析比较。

An analysis and a comparison was made of the influence of the reinforced hoops with various shrink ranges on the internal stress of a centrifugal drum using the finite element method.

第二章首先确定了阀芯过密封的结构,并探讨了阀芯过的选择,为日后的加工提供了依据。

Chapter 2 first determines the structure of the spool interference seal and discusses the choice of the magnitude of interference, in order to provide a basis for future processing.

随着安装过的增大,油封唇口接触宽度不断增加,唇口最大接触压力先是有所增加,后逐渐趋于一定值。

Thirdly, along with the increase of the interference the width of the contact field on the air side become larger, but the max contact pressure increase first and then come to a constant value.

在过配合中由于配合表面过盈量的影响,常使装配后的套筒类零件发生轴类零件内径减小和孔套类零件外径增大。

In the interference fit of assembled parts, inner diameter of sleeve-type parts was reduced and outer diameter of whole cover parts was increased by the magnitude of interference effects.

该方法和程序,不仅可以对过联接的可靠度进行分析,而且可以对过盈量进行优化,有效地提高配合系统的可靠度。

Using the method and the programs not only can calculate reliability of interference fit, but can notably raise it by optimization for interference quantity.

文章根据皮碗式清管器在钢质管道中的运行特点,分析了影响清管器皮碗的特性及磨损因素,给出了皮碗合理过

The article analyzes characteristics and abrasion factor of leather cap type pig according operation feature, and then proposes reasonable magnitude of interference.

主要分析差动滑动和弹性滞后等因素对承受预加载荷下的滚动直线导轨副摩擦力的影响,得出了过盈量与摩擦力的关系。

The effect of differential sliding and elastic hysteresis on the frictional force in the rolling linear guide (LG) subjected to preloading is analyzed.

该系统可完成有关过配合的最小配合面压强、传递载荷所需的最小过等参数的计算,为过配合的设计与计算提供了一个高效的工具。

The minimum fitting pressure and tightness using to transfer load can be easily calculated. It provides an efficiency tool for tight fitting's design and calculating.

仿真结果可对配合的过及压入深度进行评估,为过配合的联接强度分析、优化设计提供一定的参考,从而能有效地缩短调试周期、降低成本。

The simulation results can be assessed on the number of interference. It provides a theoretical basis for the strength analysis and optimal design to reduce costs.

本文用权函数法导出了由套装应力引起的组合厚壁筒内边裂纹的应力强度因子公式 ,这些公式可用于计算组合厚壁筒在不同裂纹深度、材料、过盈量和尺寸情况下的应力强度因子。

The weight function formulas are worked out and can be used for all kinds of depth of crack, materials, assemblage excess, size of combined thick wall cylinder to compute the stress intensity factors.

配合可分为结合件间有自由转动或滑动从而需要具有一定间隙的间隙配合以及结合件需要紧密压靠一起 的压配合或过配合。

Fits can range from free running or sliding, where a certain amount of clearance, exists between mating parts, to press or interference fits where parts are forced together under pressure.

配合可分为结合件间有自由转动或滑动从而需要具有一定间隙的间隙配合以及结合件需要紧密压靠一起 的压配合或过配合。

Fits can range from free running or sliding, where a certain amount of clearance, exists between mating parts, to press or interference fits where parts are forced together under pressure.

盈量的原声例句

盈量的网络释义

盈量 盈量:达到所能容纳或经受的最大限度。

以上关于盈量的英语翻译来自英汉大词典,希望对您学习盈量的英语有帮助。