本文为您带来端面的英文翻译，包括端面用英语怎么说，端面用英语怎么说，端面的英语造句，端面的英文原声例

本文为您带来端面的英文翻译，包括端面用英语怎么说，端面用英语怎么说，端面的英语造句，端面的英文原声例句，端面的相关英语短语等内容。

端面的英文翻译，端面的英语怎么说？

端面的英语网络释义

... 端部突缘安装式燃油喷射泵 end flange-mounted fuel injection pump V 端面 transverse plane 端面参数 transverse parameters ...

连杆端面平行度自动检测仪的设计-机械设计类-木哥机械资料商城[机械毕业设计|论文] 关键词：连杆；平行度检测；端面 [gap=816]Keywords：Connecting rod ；Parallel testing ；End face

... 非承重墙 nonbearing wall 端面 head face 酚醛环氧树脂 novolac expoxy ...

... end mill端铣刀 end plane端面 end plate底板 ...

端面的汉英大词典

端面[duān miàn]

• end face; end plane; end surface; head face; side surface; terminal face
• 短语:
  • 端面板 end plates;
  • 端面扳手 face spanner; prong key;
  • 端面宝石轴承 {机} end stone jewel bearing;
  • 端面泵浦激光器 end-pumped laser;
  • 端面车床 {机} face lathe;
  • 端面车刀 {机} facing tool;
  • 端面车[切]削 facing; face cutting;
  • 端面齿轮 face gear; contrate gear [wheel];
  • 端面淬火 end hardening [quenching];
  • 端面仿形车削 face profiling;
  • 端面棘轮 end ratchet;
  • 端面键 straight end-face key;
  • 端面镜 end mirror;
  • 端面量具 end measure;
  • 端面密封环 end face sealing ring;
  • 端面磨床 face grinding machine;
  • 端面燃烧固体火箭 endburning rocket;
  • 端面跳动 end face runout; ending beat [pulsation]; face runout;
  • 端面跳动测量 end pulsation measurement;
  • 端面凸轮 edge [end; face; plate] cam;
  • 端面图 end view drawing;
  • 端面纹理 end grain;
  • 端面铣 facing cut;
  • 端面铣床 face miller;
  • 端面铣刀 face cutter;
  • 端面铣刀齿 face tooth;
  • 端面铣削 {机} face milling

端面的英语短语

端面的英文例句

在2001年夏，我们决定将设备从后端技术提供商转换为前端面向消费者的搜索服务。

In the summer of 2001, we decided to switch the gear from a backend technology provider to a front-end consumer-oriented search service.

自动纠偏控制一个端面的整齐度。

Automatic rectify deviation control a end surface regularity.

它由侧面、端面、底及盖构成。

It consists of the side, bottom end, and cover.

轴封采用新颖的双端面机械密封结构形式。

Seal using novel double-end mechanical seal structure.

框架木箱也是由底座、侧面、端面及顶盖构成。

Wooden framed box is composed of a base, side, end and a top cover.

我们开端面试吧。说说你本身和过去的一些经验吧。

Let's start the interview with some questions. Tell me just around yourself along with past experience.

弹簧性能的发生变化将会直接影响机械密封端面比压。

Changes in the spring performance will directly affect the mechanical seal face pressure.

用其端面进行表面磨削的圆柱、直杯及外展杯状砂轮。

Cylinders, straight cups, and flaring cups are used for surface grinding with the end face of the wheel.

刮板取料机构安装在主梁下面，取料方式为全端面取料。

Scraper feeding mechanism is installed below the main girder, feeding way is take for full face.

螺旋通道的端面是焊接密封的，密封性能好，结构可靠。

The end surface of spiral channel is sealed by welding, therefore the sealing performance is good with reliable structure.

上周三，终端面一小段的冰发生冰解，造成巨大的冰山从终端面分离。

Last Wednesday, a small section of that ice calved, resulting in a massive iceberg separating from the face.

研究表明在部分密封端面上加工微孔可有效增大端面静压。

The parametric study demonstrates that substantial hydrostatic pressure can be produced on the seal face with partial micro-pores.

端面车削既可以从外表面向内切削也可以从工件中心往外切削。

Facing can be carried out either from the periphery inward or from the center of the workpiece outward.

位于变频器上方端面的操作面板，大大的方便了用户的使用操作。

Converter at the top end of the operation panel, a significant convenience to the user's use of the operation.

在飞轮前端面有一浅凹口，其用来确定第一个气缸中活塞的位置。

In the front face of the flywheel, there is a shallow indentation used to determine the position of the piston in the first cylinder.

设备口法兰的类型、等级及端面应符合买方图纸或数据表的规定。

The type, rating and facing of nozzle flanges shall conform to those specified in Purchaser's drawing or data sheet.

它的合资公司上汽通用五菱5月份开始对低端面包车打折促销带来了销量增长。

Sales rose after it began offering discounts in May for low-end minivans made by joint venture SAIC-GM-Wuling.

事实上，此次影响的极端面兴许会使得你与一位密友或恋人渐行渐远。

In fact, the extremist nature of the influence may actually find you even further divided from a close friend or lover.

喷嘴高度：指喷嘴端面与切割表面的距离，它构成了整个弧长的一部分。

Five, the nozzle height: refers to the nozzle surface and cutting the distance from the end, it constitutes the part of the whole arc long.

然后用内撑的方式夹持一环形件，开动机床，车削卡爪的内圆部份和端面。

The inner part of the clamping claw and the end face of the clamping claw are used for holding an annular part in an inner support.

这时，如果展开项目(在上端面板中)，就可以看到所有当前的数据库信息。

Now when you expand your project (in the upper pane) you will see all of your current database information.

本文介绍光干涉条纹及其检测高精度浮动端面密封环密封面的理论与应用。

This paper introduces the optical interference and its theory and application on the inspection of high precision flatness of the seal-face of floating end-face seal rings.

此工件有一精确机加工的大孔，因此通过一圆柱体采用该孔和工件端面定位。

The workpiece has an accurately machined bore, and is located from the bore and the end face, from a cylindrical post.

堆料方式为人字形和倾斜层组合的连续复合形堆料，取料方式为全端面取料。

Stacking way for chevron and sloping layer combination of continuous composite material piling and taking way is expected to take for full face.

用分条机做出得产品具有自动封边的效果，分条的卷料两边绝对平行，端面平整。

The products made by this machine have automatic banding effect, and roller fabric slitting sides are parallel. Besides, its end faces are very smooth.

刨出极精细的部分制作端面晶粒胶合板，背面衬上一层报纸，作为器具的装饰成分。

Extremely fine sections are then planed to produce the end-grain veneers, which are backed with paper and applied as a decorative element to utensils.

如指定使用外螺纹及内螺纹或榫面及槽面法兰，容器设备口法兰端面应为凹槽型。

When male and female (M&F) or tongue and groove (T&G) type flanges are specified, the nozzle flange facing of the vessel shall be of female or groove type.

端部撕扯：由于不正确的设备节奏而导致的在大端面处形成的凹刻痕状滚子毛坯缺陷。

HEAD PULL : Green roller defect caused by improper machine timing; results in nick or indent of large end of radius.

在端面车削操作中，进给由横向滑板提供，而切削深度则通过大拖板或复式刀架控制。

During a facing operation, feed is provided by the cross slide, whereas the depth of cut is controlled by the carriage or compound rest.

密封端面正锥度的增加能使密封气膜刚度显著提高，但同时也使密封的泄漏量有所增加。

With the increasing of seal face's positive taper, the stiffness of gas film would obviously increase, but the leakage of seal would also increase.

端面的原声例句

端面的网络释义

端面 端面指圆柱形工件两端的平面。经常用于描述机械加工中零件的特定平面，多见于齿轮，机床等机械机构。

以上关于端面的英语翻译来自英汉大词典，希望对您学习端面的英语有帮助。