裁与英语怎么说

admin2024年11月13日中英词典4190

本文为您带来裁与的英文翻译,包括裁与用英语怎么说,裁与用英语怎么说,裁与的英语造句,裁与的英文原声例

本文为您带来裁与的英文翻译,包括裁与用英语怎么说裁与用英语怎么说裁与的英语造句裁与的英文原声例句裁与的相关英语短语等内容。

裁与的英文翻译,裁与的英语怎么说?

  • 裁与

  • Cut with

  • 以上为机器翻译结果,长、整句建议使用 人工翻译 。

裁与的英语网络释义

裁与的汉英大词典

裁与的英语短语

  • 仲裁与调解中心wipo arbitration and mediation center

  • 仲裁与调解相结合arb-med

  • 仲裁与口头证供Arbitration and Oral Evidence

  • 联邦仲裁与调解局Federal Mediation and Conciliation Service

  • 总裁与首席营运长chelloef operating officer;Chief Operating Officer

  • 社会制裁与个案工作Sanctions and

  • 国际商事仲裁与司法International Business Arbitration and Justice

  • 仲裁与调解Arbitration & Mediation

  • 仲裁与裁决arbitration and award

  • 巴尔扎克与小裁缝Balzac and the Little Chinese Seamstress;The Little Chinese Seamstress;Balzac and the Little Chines

裁与的英文例句

在此基础上提出,“审分离、各自终局”是解决劳动争议仲诉讼衔接问题的有效方法。

Then the author goes on to suggest a solution, that is, a separation of arbitration and the trial with respective results.

对大间隙冲冲件断面质量、模具磨损的影响进行了分析,并提出了提高模具寿命的具体方法。

The influences of a large clearence are analyzed to stamping parts, quality of cross section and die wear. A detail measure to improve die life is also discussed in this paper.

就其职权而言,谈会处理的安全军控问题,事关国际和平稳定,责任和意义重大。

With regard to its mandate, the CD's importance is reflected in its responsibility to cope with issues of security and arms control, issues that impact world peace and stability.

判多德商量了一番,同时曼联球员围着判索要点球。

Referee Phil Dowd went to consult his linesman, sparking ugly scenes as the United players surrounded the officials demanding a penalty.

我朝着太阳爬升,一起阳光出。

Sunward I've climbed, and joined the tumbling mirth.

2009年,中俄在认真倾听各方意见基础上,向谈会提交CD/1872号工作文件,针对有关评论问题进一步诠释上述条约草案。

In 2009, focusing on the comments and proposals made by many other CD members, China and Russia submitted to the CD the working paper, further clarifying and explaining the PPWT accordingly.

作为军控军领域的唯一多边谈判机构,谈会已连续6年未能开展实质性工作。

As the single multilateral negotiating forum in the field of arms control and disarmament, the CD has been unable to conduct substantive work for six years.

在我们膜时,也应用剪刀沿着标线走齐,由于这会便当在覆膜中的上膜工作,更能保证质量胜利率。

When we cut the film, also used scissors along the line to go together, because this can easily in the laminating film, can guarantee the quality and success rate.

为了使上层片的边下层片的边成一排,用左手将上层片往下拉,这样可保持平整。

Using the left hand pull the top section down in order to line its edge with that of the under section (needle still in the down position) which remains flat.

针对板材剪切加工的特点,设计了一种应变片式位移传感器。

A displacement sensor of strain foil is designed aiming at the sheet shearing and blanking processes.

然而,一旦使用这些面料,就可以不考虑丝绺线方向,只需布边成直角将面料横即可。

When these fabrics are used, however, one may ignore the grain and simply cut across the fabric at right Angles to the selvage.

针对板材剪切加工的特点,设计了一种应变片式位移传感器。

A displacement sensor of strain foil is designed based on the characteristic of sheet shearing and blanking process.

通过对不同间隙条件下冲件断面质量以及不同间隙条件下模具的磨损情况,分析说明了冲模间隙模具磨损和产品质量间的关系。

Based on the punching section quality and mould wear in different gap conditions this paper analyses the relation between die gap and mould wear and product quality.

在相关文献提出的基于矩形窗口剪的圆形窗口剪算法的基础上,通过判断圆形窗口线段的位置关系,提出一个免解二次方程的圆形窗口剪算法。

Through judging the relation of the position between the circle clip window and the line to be clipped, a new line-clipping algorithm is given based on the correlative literatures.

负责切的正常生产维护,包栝工艺调整、设备改造的建设和参

Responsible for routine work and maintenance of the cutting including production parameter adjustment and taking part in equipment improvement.

本文论述了客车件冲模cad系统的研制开发。

This thesis deals with the research and development of stamping die CAD system for carriage.

分析了冲间隙件质量的关系。

The relation between the blanking clearance and quality of blanked parts is analyzed.

叙述了银饮水杀菌技术,如高比表面载银活性炭,高比表面载银氧化铝等的研究开发。

The current research and development of bactericidal technic with silver, such as high surface area activated carbon with silver, high surface area aluminium oxide with silver etc. are summarized.

然而,现今的研究中,相对于冲、拉深、弯曲等冲压基本工序而言,关于翻边工艺方面的研究比较少,翻边有关的文献资料更为有限。

However, compared with other stamping processes such as blanking, drawing and bending, the investigation about flanging process is very limited in existing documents.

方法:我们回顾1978年至2007年谈会的一个学术中心诊断小儿所有儿童的医疗档案。

Methods: we reviewed the medical files of all children diagnosed with CD between 1978 and 2007 at a single academic pediatric center.

调解协议也可规定,各方不得在任何随后的,同一争议有关的判、仲、司法或审程序中,传召有关的调解员出庭作供。

The agreement may also provide that no party will call the mediator as a witness in any subsequent adjudication, arbitration, judicial or tribunal proceedings concerning the same dispute.

制衣业面料剪、对格对条,床定位,电脑开袋机标线,绣花机生产过程中的定位;

Fabric cutting, garment industry to the case with the article, cutting bed positioning, computer bag machine line, embroidery machine the positioning in the process of production;

在冲模智能设计c BR系统的研究开发过程中,零件的识别是难点之一,零件的识别也就是零件相似性匹配。

Recognition of parts is one of the difficulties in the process of research and development of CBR system of blanking die intelligence design. Part recognition means the parts' similarity matching.

介绍了数控电火花线切割加工冲模时基准模非基准模补偿量的计算方法,并在此基础上得出一种快速编制非基准模加工程序的途径。

The paper introduces a calculating method of offset in the reference and unreference of blanking die in WEDM. And based on it, reach an approach to fast program for unreference die.

模的计算机辅助设计辅助制造( CAD/ CAM)系统由两部分组成,即工艺分析、计算和模具设计。

The CAD/CAM system of the blanking die consists of two parts, i. e. the process analysis and calculation and the die design.

箱包手袋业:设计、出格、算料CAD软件、数字化仪、纸样切割机、电脑皮机;激光雕刻切割机。

Cases AND hANDbags: Design, style AND CAD software, digital instrument, paper sample cutting machines, computerized leather tailoring machines laser engraving AND cutting machines.

结论:方剂中药物加减化都可能影响方剂的组成结构及作用,这种改变方剂中微量元素含量配比的改变密切相关。

Conclusion: the composition and affect are effected by plused or reduced about Chinese medicine in inscription. The effect is closely related to the content of trace element.

详细阐述了光洁冲凹模、压边圈等重要零件的结构设计选材,并对光洁冲间隙进行了分析和选择。

Structure design and material choice of important parts such as the die, blank holder, etc. were stated in detail. Also, fine blanking clearance was analysed and selected.

详细阐述了光洁冲凹模、压边圈等重要零件的结构设计选材,并对光洁冲间隙进行了分析和选择。

Structure design and material choice of important parts such as the die, blank holder, etc. were stated in detail. Also, fine blanking clearance was analysed and selected.

裁与的原声例句

裁与的网络释义

很抱歉,暂无字的网络释义。

以上关于裁与的英语翻译来自英汉大词典,希望对您学习裁与的英语有帮助。