本文为您带来角刃的英文翻译，包括角刃用英语怎么说，角刃用英语怎么说，角刃的英语造句，角刃的英文原声例

本文为您带来角刃的英文翻译，包括角刃用英语怎么说，角刃用英语怎么说，角刃的英语造句，角刃的英文原声例句，角刃的相关英语短语等内容。

角刃的英文翻译，角刃的英语怎么说？

角刃的英语网络释义

角刃的汉英大词典

角刃的英语短语

角刃的英文例句

本装置采用圆锥表面磨法对钻头进行后面刃磨，可保证磨出的钻头具有合理的后角，对称精度高。

The device is posterior cutter grinding to drill in cone surface grinding method that it can vouch for drill with reasonable back Angle, and symmetry precision is high.

本文介绍在设计矩形花键滚刀时，花键滚刀倒角切削刃的齿形角和起始点的精确设计与计算方法。

In this paper, the author introduced the accuracy design of chamfer edge of spline gear hob and the calculating method when designing parrallel side spline gear hob.

本文提出了一种盘形剃齿刀的优化设计方法，其最优解是最后一次刃磨时的最小啮合角对应的条件；刀具寿命期间，保证进入双齿啮合剃齿。

This paper proposes an optimization method on the plate shaving cutter, its optimal solution is the premises matching the smallest toothing Angle on the condition of the last cutting grinding.

分析了现有渐开线花键拉刀的缺陷，提出带侧刃后角的渐开线花键拉刀的磨削工艺，并进行了齿形设计及齿形误差分析。

The current involute spline broach is analyzed, the grinding technology of involute spline broach with side clearance is described, the profile is designed, and profile error is analyzed.

凹模型孔设计有一定圆角，凸模带有侧刃，并采用了可靠的定位等措施有效地控制了六角工件的对角线尺寸。

The diagonal dimension of the hexagon parts is controlled by reliable position setting units, small round corner for female module designing and the male module with lateral sharp edge.

根据单点切削力模型，考虑平头立铣刀多刃和具有螺旋角的特点，建立了铣削力离散模型。

Considering the features of multi-edges and helix flutes for end milling, a cutting force discrete model base on single point cutting tools model was built.

通过分析掉渣、崩刃、噪声的机理，采取改进刀具参数、采用正前角双刃刀片等措施，较好解决了上述问题。

By analyzing the mechanism of falling chip, tipping and noise, through changing the cutter's parameters and using double edge positive edge inserts, the problems can be solved.

文中提出了考虑径向进给速度时飞刀左右侧刃工作后角的计算方法，实际算例验证了其正确性。

The calculating method of the working orthogonal clearance of the flying cutting tool machining worm wheel in radial feeding way is put forward, and a calculating example is given out.

为提高硬质合金插齿刀的抗崩刃能力，需要采用负前角的特殊设计；

There is a special way of design of carbon alloy slotting tool which has minus rake angle to increase the ability of resisting the tooth edge collapse.

萨克斯元帅希望给法国骑兵装备剑刃三角截面的剑，使士兵只能刺击。

Marshal Saxe wished to arm the French cavalry with a blade of a triangular cross section so as to make the use of the point obligatory.

针对该钻型的特点，提出用钻尖主刃的外缘和横刃转点处的锋角作为其设计参数值。

Point angles at outer corner and chisel edge corner are proposed to be used as the drill design parameters to determine the type uniquely and the relief Angle is used as a supplement parameter.

在检测分析进口抗磨件基础上，采用空冷贝氏体铸钢制造了D9L推土机铲刃、铲角。

Based on the inspection and analysis to the imported wear resisting components, the cutting blade and end bit of model D9L bulldozer were made using air cooled cast steel.

角设计可防止高速切削时的崩刃。

Corner radius against chipping in high RPM machining.

通过砂轮微观出刃形貌的图形化处理，建立磨粒出刃高度、出刃体积、磨粒切削前角和后角等特征参数模式。

Through the graphics processing of micro protrusion topography of wheel, the grain protrusion height, grain protrusion volume, grain rake angle and clearance angle were modeled.

角设计可防止高速切削时崩刃。

Corner radivs against chipping in high RPM machining.

锋利的切削刃和正前角是要避免。

Sharp cutting edges and positive rake angles are to be avoided.

本文对刮削过程中工作角度问题进行了探讨，并对工作刃倾角、工作前角和工作后角进行了具体计算，得到了一些变化规律。

A study is made on the working Angle in scraping process, practical Calculations are taken up to the Angle of working edge, rake Angle and back Angle. Some patterns of such change are found out.

本文提出了对直槽零前角滚刀，原始截面刃形在基本蜗杆齿面上，其新滚刀刃形的计算方法。

This paper presents a calculating method for the edge of a new hob with straight groove and zero rake Angle. The original section edge of the said hob is on the surface of basic worm.

提出一种用螺旋角仿形加工装置在工具磨床上刃磨齿轮滚刀前刀面的方法。

By using the profile modeling machining equipment of helix Angle, a new method about grinding rake face of gear cutter hob on tool grinder is presented.

提出一种用螺旋角仿形加工装置在工具磨床上刃磨齿轮滚刀前刀面的方法。

By using the profile modeling machining equipment of helix Angle, a new method about grinding rake face of gear cutter hob on tool grinder is presented.

角刃的原声例句

角刃的网络释义

很抱歉，暂无字的网络释义。

以上关于角刃的英语翻译来自英汉大词典，希望对您学习角刃的英语有帮助。