本文为您带来解形的英文翻译，包括解形用英语怎么说，解形用英语怎么说，解形的英语造句，解形的英文原声例

本文为您带来解形的英文翻译，包括解形用英语怎么说，解形用英语怎么说，解形的英语造句，解形的英文原声例句，解形的相关英语短语等内容。

解形的英文翻译，解形的英语怎么说？

sorry，暂无解形字的英语翻译！

解形的英语网络释义

解形的汉英大词典

解形的英语短语

解形的英文例句

停速行驶车辆标志是有红边的橙色三解形标志。

The slow-moving vehicle sign is orange with a red border.

用单纯形法求解线性规划问题的多最优解，对一类特殊的可行域，有时会导致失效。

Multiple optimal solutions to the linear programming problem by the simplex method for specific feasible regions sometimes might lead to a loss of efficiency.

采用平面四边形为基本封闭形建立位移方程，给出了所有四个基本类型的解。

A planar quadrilateral is adopted as the basic loop in building up the displacement equations, and four basic types of solutions are given.

石块形成水泉的本体，而水的表现并非物件性的；它被用来松解格阵并消融石块的具形。

Once it is in place and established, the water, instead of being developed objectively, is used to visually disintegrate the grid and dematerialize the stones.

最后运用虚功原理给出了胀形平均液压的解析解。

In the end, the average hydraulic pressure of bulging is given by the principle of virtual work.

运用单纯形方法的一个问题是解为小数值，作者用一个简单的方法进行取整。

One problem caused by using simplex method is that the results are fractional values while need integers, and that provides a simple but effective method to solve it.

实际运用表明，该方法能够实现板形板厚的解耦，满足板带质量控制要求并具有良好的鲁棒性。

Practice proves this method can implement decoupling of steel shape and plate thickness, meets the requirements of steel plate quality, with excellent robustness.

由其解的表达式，得到分形曲面生成和插值的一种新方法。

Using the solution obtained, a new method for the generation and interpolation of fractal surface is given.

为了进一步完善解线性规划问题的单纯形法，本文给出了表达一类具有无穷多个最优解的线性规划问题通解的方法。

To improve the method of solving linear programming problem by means of simplex method, this paper gives the method of linear programming problem general solution with infinite optimal solutions.

利用单纯形法求解该线性规划问题，便可得到整数规划的最优解。

By using simplex method to solve the LP, the optimal solution of ILP can be obtained.

本文讨论了对称张量场共形协变方程的真空解。

Vacuum solutions of conformally covariant equation for symmetric tensor field are discussed.

根据他人已有的关于材料应变软化模型的球(柱)形孔扩张问题的解，建立了压密灌浆中的浆泡扩张模型。

According to the former solution of spherical or columnar hole about material strain-softening model, the model for grout bulb expansion is formed in compaction grouting.

本文提出了一种盘形剃齿刀的优化设计方法，其最优解是最后一次刃磨时的最小啮合角对应的条件；刀具寿命期间，保证进入双齿啮合剃齿。

This paper proposes an optimization method on the plate shaving cutter, its optimal solution is the premises matching the smallest toothing Angle on the condition of the last cutting grinding.

本文采用几何规划方法对船舶的箱形剖面舱口盖进行最小重量设计，求得了解析的最优解。

In this paper, minimum weight design of a hatch cover of box cross section is made by geometric programming. The analytic optimal solution is obtained.

本文对电孤放电和催化剂热解碳氢气法制备的多层直形纳米碳管的倒空间及其螺旋度，采用电子衍射进行了研究。

Straight carbon nanotubes with multishells produced by arc discharge and pyrolysis of organic gases using metal particles as catalysts have been investigated by means of electron diffraction.

一个精确的重富立叶级数解析解用于分析四边形自由的点支横观各向异性平行四边形板的自由振动、屈曲和弯曲。

The accurate double Fourier series analytical solutions are obtained for the free vibration, buckling and bending of Point Supported Anisotropic Skew Plates with four free edges.

解线性规划问题除常见的单纯形法和对偶单纯形法外，还有一种原始对偶法。

Commonly in additional to simplex method and dual simplex method, another original dual method can solve the liner programming.

本文提出了非对称轧制过程的全粘着三角形上限解模型，并建立了模型参数关系。

In this paper, an upper bound solution model For asymmetrical rolling and the relationships between its parameters are presented.

假设不确定性为矩阵多胞形结构不确定性，利用矩阵的秩- 1分解，得出系统鲁棒稳定的充分条件。

We also derive the sufficient conditions of robust stability by rank-1 decomposition of the matrix under the assumption that uncertainty is matrix polytope structured uncertainty.

通过模拟试验，研究了泥浆的颗粒组成与泥浆的解胶曲线、高中压注浆成形速率及坯体挺形性等的关系。

By simulated test, the co-relationship among the slip granulometric composition, slurry deflocculation curve, mid-high pressure casting forming speed and green body shaping endurance is studied.

本文应用共形几何代数分析串联机器人的运动学反解。

This paper applies conformal geometric algebra to analyze the reverse kinematics of serial robot.

研究了一种六关节机器人通过奇异位形时新型解的方法。

A new solution to pass through singular configuration for six-joint robot is studied.

方程的两类解分别代表表面马氏体和孪晶马氏体的形核。

Two kinds of solutions are obtained, which represent the nucleation of surface and twin martensites respectively.

基于解非线形规划的凸单纯形法，对一类线形分式规划的消耗系数矩阵进行灵敏度分析。

Based on the convex simplex method for nonlinear programming, a sensitivity analysis of consumption coefficient matrix in linear fractional programming is presented.

针对一类非线性比式和问题首次提出一种求其全局最优解的单纯形分枝定界算法。

This paper presents for the first time a simplicial branch and bound algorithm for globally solving a class of nonlinear sum of ratios problem.

利用有号距离和形心将无缺货补货的模糊库存的总成本利用有号距离和形心解模糊化。

We use signed distance and centroid to defuzzify the total cost in the fuzzy sense in fuzzy inventory without backorder.

二分单纯形算法中，线性规划问题的最优解是通过求解一系列子问题来实现的。

In order to solve linear programming problems, simplex method with bisection carries out pivoting operation on a series of sub-program.

在用对偶单纯形法解线性规划问题时，必须找到初始正则解。

To solve a linear programming with the dual simplex algorithm, it is necessary to find a primal regular solution.

提出了一种基于输出拟形的解耦控制器设计方法。

The decoupling controller design method based on the output shaping is presented in this paper.

提出了一种基于输出拟形的解耦控制器设计方法。

The decoupling controller design method based on the output shaping is presented in this paper.

解形的原声例句

解形的网络释义

解形 解形是一个汉语词，拼音jiě xíng，注音 ㄐㄧㄝ ˇ ㄒㄧㄥˊ，解释为脱身。

以上关于解形的英语翻译来自英汉大词典，希望对您学习解形的英语有帮助。