本文为您带来解支的英文翻译，包括解支用英语怎么说，解支用英语怎么说，解支的英语造句，解支的英文原声例

本文为您带来解支的英文翻译，包括解支用英语怎么说，解支用英语怎么说，解支的英语造句，解支的英文原声例句，解支的相关英语短语等内容。

解支的英文翻译，解支的英语怎么说？

解支的英语网络释义

解支的汉英大词典

解支的英语短语

解支的英文例句

说明采用七自由度单元的有限元法进行矩形截面简支梁的弯翘分析，有很高的精度，可以代替繁琐的解析解。

The result shows seven-freedom unit finite element method has high precision to analyse simple beam of rectangular section, it can replace complex analytic solution.

一个精确的重富立叶级数解析解用于分析四边形自由的点支横观各向异性平行四边形板的自由振动、屈曲和弯曲。

The accurate double Fourier series analytical solutions are obtained for the free vibration, buckling and bending of Point Supported Anisotropic Skew Plates with four free edges.

利用二维有限积分变换的方法推导出了四边固支矩形厚板位移和内力的精确解。

The exact solutions of displacement and inner force for clamped rectangular thick plate were deduced with two-dimension finite integral transform method.

由动力学的一般解，导出了扇形板和扇形环板在广义弹性简支和广义刚性滑动边界条件下自由振动的频率方程和振型；

From these dynamic solutions, frequency and mode shapes of sectorial plate and sectorial annular plate under boundary conditions of GSS and GRS are derived.

在此基础上，给出了两端简支压电梁机电耦合作用在均布载荷下的精确状态方程解。

The exact state equation solution of mechanical electric coupling for a simply supported beam subject to uniform distribution of load is given.

特别地，对紧支集小初值的情况，给出了经典解的生命区间及其在非线性波动方程中的应用。

In particular, for the case of small initial data with compact support, the author gives the life-span of classical solutions and its application to nonlinear wave equations.

用软件ANSYS进行简支梁的纵横弯曲计算，参照理论解，根据精度要求提出梁的参考剖分份数。

Using FEM software of ANSYS to calculate vertical and horizontal bending beam, referencing the theoretical value, the appropriate subdivision number about beam is obtained.

用本文的解还可以推出多种荷载作用下简支圆板的塑性极限荷载。

The plastic limit loads of simply supported circular plates under various loads can be obtained based on the present solution.

给出四边简支任意厚宽比的矩形板在任意荷载作用下的控制方程及其精确解。

The governing equations as well as their exact solutions are constructed for a simply supported rectangular orthotropic plate with arbitrary thickness subjected to arbitrary Loads.

本文给出了正交各向异性变厚度周边简支圆薄板在均布载荷下大挠度问题的解。

The solution of large deflection problem of thin orthotropic circular plates with variable thickness under uniform pressure under simply supported boundary condition is obtained in this paper.

利用辛几何的方法推导出了两邻边固支另两邻边简支弹性矩形薄板问题的理论解。

The analytical solutions for an elastic rectangular thin plate with two adjacent boundaries clamped-supported and the others simplified-supported are derived by a symplectic geometry method.

对于周边简支的组合网状扁壳可求得基本方程序的解析解。

The analytical solution to the basic equations of the composite lattice flat shell simply supported at its perimeter is given.

其次，运用比较引理，通过构造上下解证明解的支集具有瞬间收缩性质的充要条件依赖于变化系数的性态。

Then, at the aid of comparison lemmas, we will prove the property of instantaneous shrinking of support depends on the behaviors of variational coefficient.

酸解淀粉经均相脱支和结晶化可以形成较好的微晶，且酸解时间越长结晶度越高。

The better crystallite can be obtained by homogeneously debranching and crystallizing the acid-hydrolyzed starch. Besides the crystallinity increases as the hydrolysis time lasts.

文中求得了周边简支多边形板的弹性改进理论解，数值结果与三维弹性理论精确解的结果非常接近。

The solution of the refined theory for simply supported polygonal plates has been obtained; and its numerical result is very close to the exact solution of the three-dimensional theory of elasticity.

给出四边简支任意厚宽比的矩形板在任意荷载下的精确解。

The exact solutions for a simply supported rectangular thick plate with arbitrary ratio between thickness and width under any given loads are presented.

在两端简支的边界条件下采用分离变量法求解偏微分方程，得到用级数表示的应力解，然后根据剪力滞系数的定义即可得到组合箱梁翼板的剪力滞系数。

Separation of variables is employed to solve the differential equation under the boundary condition of two ends of the girder being simply supported, and the solution of stress is…

运用双剪统一屈服准则，对线性荷载的两种不同分布形式作用下的固支圆板进行了弹塑性分析，分别得出了相应的统一解形式。

A unified solution of plastic limit of simply supported circular plates subjected to border uniform distributed loading is presented based on the Twin Shear unified Yield Criterion.

方法 2003～2009年我院收治手部瘢痕挛缩畸形25例，行瘢痕松解，“Z”成形，皮片、皮瓣移植及支具牵引等方法治疗。

Methods 25 cases with hand scar contracture were retrospectively analyzed in our hospital from 2003 to 2009, they were released the scar with "Z" flap, skin graft, flap, draw tool etc.

在两端简支的边界条件下采用分离变量法求解偏微分方程 ，得到用级数表示的应力解 ，然后根据剪力滞系数的定义即可得到组合箱梁翼板的剪力滞系数。

On the basis of mathematical statistic, using the method of multiple regression analysis, the practical calculating formula of the shear lag coefficient in thin-walled curved box girders is derived.

本文采用双剪统一屈服准则首次对受环形均布荷载作用下的简支圆板进行了塑性极限分析，得出了相应的统一解形式。

Then the yield conditions of the reinforced concrete plates with bilateral layout are derived employing the twin shear stress yield criterion.

本文采用双剪统一屈服准则首次对受环形均布荷载作用下的简支圆板进行了塑性极限分析，得出了相应的统一解形式。

Then the yield conditions of the reinforced concrete plates with bilateral layout are derived employing the twin shear stress yield criterion.

解支的原声例句

解支的网络释义

很抱歉，暂无字的网络释义。

以上关于解支的英语翻译来自英汉大词典，希望对您学习解支的英语有帮助。