本文为您带来轮辋的英文翻译，包括轮辋用英语怎么说，轮辋用英语怎么说，轮辋的英语造句，轮辋的英文原声例

本文为您带来轮辋的英文翻译，包括轮辋用英语怎么说，轮辋用英语怎么说，轮辋的英语造句，轮辋的英文原声例句，轮辋的相关英语短语等内容。

轮辋的英文翻译，轮辋的英语怎么说？

轮辋的英语网络释义

轮辋( rim) 是摩托车车轮中最大的铝合金零件，2013 年它的铝化率已达 70% 左右，摩托车车轮( 图 8) 及轮辋生产者( 图 9) ，已形成系列化，轮...

... 挡泥板fender 轮辋wheel rim 轮毂hub,wheel hub ...

轮辋的汉英大词典

轮辋[lún wǎng]

• rim; felloe; felly; wheel rim; circular rim; rimmer; wheel felloe
• 短语:
  • 轮辋边 rim bead;
  • 轮辋边环 rim side ring;
  • 轮辋边缘 edge of rim;
  • 轮辋槽 rim gutter;
  • 轮辋侧边 bead of rim;
  • 轮辋齿轮 rim gear;
  • 轮辋底 bead seat;
  • 轮辋钢环 rim ring;
  • 轮辋工具 rim tool;
  • 轮辋肩 rim shoulder;
  • 轮辋宽度 rim width;
  • 轮辋轮廓 rim contour;
  • 轮辋螺母 rim nut;
  • 轮辋起重机 rim lift jack;
  • 轮辋式 rim type;
  • 轮辋速度 rim speed;
  • 轮辋凸缘 rim flange; wheel rim flange;
  • 轮辋镶环 rim clinch;
  • 轮辋楔 rim wedge;
  • 轮辋直径 rim diameter

轮辋的英语短语

轮辋的英文例句

广泛用于汽车车轮的轮辋和轮辐。

Widely used in automotive wheel rims and discs.

还透露，是一种安装在轮辋轮胎的方法。

Also disclosed is a method of mounting a tire on a rim.

他把轮胎安到轮辋上。

Install the wheel and tire assemblies.

此程序在轮辋工艺设计中具有较大的现实意义。

The program will be of significance in the process design of rim.

至于轮辋，高而可畏。四个轮辋周围满有眼睛。

Their rims were high and awesome, and all four rims were full of eyes all around.

应优先考虑与唇和眼睑的黏膜色素沉着的黑色轮辋的狗。

Preference should be given to dogs with black pigmentation of the rims of labial and palpebral mucous membranes.

介绍轮胎有限元计算中胎圈 轮辋接触问题的处理方法。

The solution to the bead rim contact problem in FE calculation of tire was described.

后系带，它的本质不是为了迫使紧缩辐条轮辋变成真正的。

After lacing it's essential not to force the rim into true by tightening spokes.

质量，工艺和独特的设计真正的定制轮辋，拿起了一套今天。

Quality, craftsmanship and true custom rims unique design, pick up a set today.

对185r 14 C轻载子午线轮胎进行宽轮辋优化设计。

The 185r14c LTR tire design was optimized by increasing the rim width.

可用轮胎工具或扁平的撬棒把轮缘的一端从轮辋辋圈上撬起。

A tire tool or flat stock can be used to pry one part of the bead up over the rim flange.

汽车车轮轮幅、轮辋、大梁、车箱底板、边框架及其它结构件。

Structural components of wheel spoke structural components of wheel spoke wheel rim girder crossbeam soleplate and frame of automobile etc.

此程序在轮辋产品工艺设计及新产品开发中具有较大的现实意义。

The program will be of significance in the process design and new product developing.

分析了滚形轮辋的制造工艺，并提出了合理的成形工艺和模具结构。

The roll forming process and mould design of wheel rim are introduced.

这是因为无内胎轮胎的经验较少的单位，甚至捏轮辋接触有时是好的。

This is because tubeless tires experience fewer pinch flats and even rim contact occasionally is okay.

我车子的左前轮撞在一大块松动的路缘石上，导致车胎爆裂、轮辋凹陷。

A great chunk of loose kerbing smashed into my left-front wheel, bursting the tyre and denting the rim.

尽管有证据显示它的当代蓝色的椭圆形，让观赏它的20“铝合金轮辋。”

Though there is evidence of its contemporary blue oval by having it ornamented on the 20 "alloy wheels."

当用工具使轮缘从轮辋辋圈中脱出后，轮缘的剩余部分可用手将其扒过辋圈。

After the bead is started over the rim flange with the tool, the remainder of the bead can be worked out over the flange with the hands.

马达装有内的每个车轮，而车轮轮辋的设计工作作为一项螺旋桨冷却将它关闭。

The motors are fitted inside each wheel while the wheel rim is designed to work as a propeller for cooling it off.

我建议三跨，这意味着超过或低于其他3人在从枢纽每个辐条轮辋的方式传递。

I recommend 3 cross which means each spoke passes over or under 3 others on its way from hub to rim.

开始拆卸轮胎时，首先应从内胎中排除空气，轮胎的轮缘一侧应推向轮辋的中心。

The bead on one side of the tire should then be pushed in toward the center of the rim.

开始拆卸轮胎时，首先应从内胎中排除空气，轮胎的轮缘一侧应推向轮辋的中心。

The bead on one side of the tire should th be pushed in toward the center of the rim.

该文提出一种半解析半数值的分析方法，对汽车轮辋挡圈的冷弯过程进行了分析。

This paper put forward a semi-analytic semi-numeric method to analyze the cold bending of the hubcap.

此外，有两个纺纱10轮辐轮辋展开下焕发出标致的标志前方轮胎，这提高了上诉的汽车。

Also, there are two spinning 10-spoke rims mounted under a glowing Peugeot logo for the front tires, which enhances the appeal of the car.

作者们写道：“大部分轮辋的生长时间都在约1分钟到35年之间，其中中位数大约是4天。”

'Maximum rim growth times span from approximately 1 minute to 35 years, with a median of approximately 4 days, ' the authors wrote.

作者们写道：“大部分轮辋的生长时间都在约1分钟到35年之间，其中中位数大约是4天。”

'Maximum rim growth times span from approximately 1 minute to 35 years, with a median of approximately 4 days, ' the authors wrote.

轮辋的原声例句

轮辋的网络释义

轮辋 轮辋（wheel rim ）俗称轮圈，是在车轮上周边安装和支撑轮胎的部件，与轮辐组成车轮。轮辋和轮辐可以是整体式的、永久连接式的或可拆卸式的。

以上关于轮辋的英语翻译来自英汉大词典，希望对您学习轮辋的英语有帮助。