钻磨英语怎么说

admin2024年11月07日中英词典3510

本文为您带来钻磨的英文翻译,包括钻磨用英语怎么说,钻磨用英语怎么说,钻磨的英语造句,钻磨的英文原声例

本文为您带来钻磨的英文翻译,包括钻磨用英语怎么说钻磨用英语怎么说钻磨的英语造句钻磨的英文原声例句钻磨的相关英语短语等内容。

钻磨的英文翻译,钻磨的英语怎么说?

  • 钻磨

  • Drilling and grinding

  • 以上为机器翻译结果,长、整句建议使用 人工翻译 。

钻磨的英语网络释义

...钻磨 衬管完井[gap=944]words] Tahe oilfield;Open-hole completion;Borehole wall collapse;Casing milling;Drilling polishing;Liner completion ...

钻磨的汉英大词典

钻磨的英语短语

  • 钻磨两用机床drilling and grinding machine

  • 水钻磨轮water borehole abrasive wheel

  • 钻头磨床drill grinding machine;bit grinder;[机]drill grinder;drill

  • 钻头磨损bit wear

  • 金刚钻磨粒diamond abrasive particle

  • 麻花钻磨削.Drill sharpening

  • 钻头磨锐机bit grinder;Sharpener drill

  • 充填磨光钻plug-finishing bur;finishing bur

钻磨的英文例句

对输出轴的夹具设计也要求也高,因为精度和公差要求高,表面更要采用钻磨

On the output shaft fixture design requirements, because accuracy and tolerance, to use more surface grinder drilled.

方法:根据不同类型桩钉及根面所处位置,分别采用钳取、根尖挺挺出及取钉等方法。

Method: The separate application of clamp, root elevator or drilling root canal according to different type of post pin and place of root surface.

得出普通钻磨时的轴向平均切削力和平均扭矩均远大于超声钻磨加工时的轴向平均切削力和平均扭矩;

The research results show that the average axial cutting force and torque of common drill-grinding are greater than that of ultrasonic drill-grinding.

本月初,坎贝尔收到命令,要求其在荷兰国际刑事法庭作证,证明曾收到泰勒赠送的粗的血

Earlier this month, Ms Campbell was ordered to testify at the International Criminal Court in the Netherlands over allegations that she received a rough-cut diamond as a gift from Mr Taylor.

安装,调整和操作单功能机混合,,切割混凝土以达到混凝土产品的制造规格。

Set up, adjust and operate single-function machines to mix, drill, grind and cut concrete to specifications in the manufacture of concrete products.

在石油天然气井施工过程中,常常造成具接头损、偏及丝扣粘连,这是引起具损坏进而演化为井下事故的主要原因之一。

In the construction process of oil and gas drilling, the joint drill wear, eccentric wear and threaded partial adhesion caused drilling damage and then evolved into the major mine accidents.

操作和维护整理机,,沙化,伞,装饰,清洗或抛光玻璃或玻璃制品。

Operate and maintain finishing machines to grind, drill, sand, bevel, decorate, wash or polish glass or glass products.

永久型封隔器由容易掉或者铣掉的材料制成。

Permanent packers are constructed of materials that are easy to drill or mill out.

安装和操作机器工具来执行反复加工操作,如车,铣,,镗,刨,珩,拉削,削或其他加工业务。

Set up and operate machine tools to perform repetitive machining operations, such as turning, milling, drilling, boring, planing, honing, broaching, grinding or other machining operations.

同时由于具接头超,也容易造成具使用周期缩短甚至提前报废。

At the same time the joint drill wear also easily lead to shortening the life cycle of drilling and even early retirement.

玉琮的抛光工艺上,垅光洁而不留据、、凿、磋的痕迹,使得器形浑圆规整。

Tsung-yu of the polishing process, the mill rather than to stay bright and clean, according to Long, drilling, cutting, traces of polish, making regular rounded shape.

的使用是必不可少的。

The use of the power drill is indispensable.

用作金属加工的车、锯、、铣削等工序。

As metal processing car, sawing, grinding, drilling, milling process.

阐述内锥面刃麻花原理及在工具床上进行削工艺试验的方法和机床的调整。

Illustrates the principle of the inner cone grinding twist drills, the process of grinding experiments on the tool grinder and the adjustment of the tool grinder.

利用相同的金属切削原理,也会得到完全不同的加工操作或工艺,就是其中最普通的一个例子,由于采用不同的加工刀具而产生完全不同的两种加工操作。

A wide variety of machining operations or processes based on the same metal-cutting principle are available; among the most common are milling and drilling carried out on various machine tools.

采用锥面削法刃削刀具的后刀面,可显著提高刀具的使用寿命,有利于保证工件加工精度和提高工件表面质量。

As a result of using the cone sharpening method sharpening drilling cutter's Flank, improving surface quality and machining precision, extending the lifetime of the drilling cutter substantially.

阐述了内锥面法刃麻花的原理以及在工具床上进行削工艺试验的方法。

This paper illustrates the principle of the inner cone grinding twist drill and the process of grinding experiments on the tool grinder.

分析了该头的结构和刃特点,进行了振动削试验。

The structures and tool grinding features were analyzed and vibration drilling experiments were done.

、铣、、锉等手段来去除质量;还可以在预制的平衡槽内改罭变平衡块的位置和数量。

By using drilling, milling, grinding, file and other means to remove the quality; Can also change in slot on the balance of the precast counterweight position and quantity.

水泥塞具有多种应用,包括水力分隔、提供可靠的平台以及在侧新眼时的套管开窗铣作业中的应用。

Cement plugs are used for a variety of applications including hydraulic isolation, provision of a secure platform, and in window-milling operations for sidetracking a new wellbore.

仅能用铣方法从井筒中去除的封隔装置。

A packer assembly that can be removed from the wellbore only by drilling or milling.

为了提高新型微头的削性能,提出了一种适合于微头的横刃修原理及方法。

To raise drilling performance of new micro-drill, a novel method was advanced for reginding of chisel edge.

阐述了麻花内锥面刃法的原理及参数的确定方法,揭示了内锥面刃中存在“翘尾”现象的原因并提出了相应的解决措施。

The inner cone grinding method of twist drills is discussed. The phenomenon of up tail in the grinding method is exposed and the solving idea is given.

主要用于刃铣刀、铰刀、拉刀、盘形车刀、插齿刀及扩孔等。

Mainly Renmo milling cutter, reamer, pulling knives, plate-shaped lathe tool, knife inserted teeth and bore drilling.

本文建立了基于渐开圆柱面的SPLIT数学模型,并进行了实际刃

This paper established the mathematical model of SPLIT drill basing on the involute cylindrical surface, and conducted real edge grinding.

阐述了内锥面法刃麻花的原理以及在工具床上进行削工艺试验的方法。

The motion modalities of CNC tool grinders with moving grinding wheel and swing grinding wheel were analyzed.

阐述了内锥面法刃麻花的原理以及在工具床上进行削工艺试验的方法。

The motion modalities of CNC tool grinders with moving grinding wheel and swing grinding wheel were analyzed.

钻磨的原声例句

钻磨的网络释义

很抱歉,暂无字的网络释义。

以上关于钻磨的英语翻译来自英汉大词典,希望对您学习钻磨的英语有帮助。