铸型英语怎么说

admin2024年11月07日中英词典4620

本文为您带来铸型的英文翻译,包括铸型用英语怎么说,铸型用英语怎么说,铸型的英语造句,铸型的英文原声例

本文为您带来铸型的英文翻译,包括铸型用英语怎么说铸型用英语怎么说铸型的英语造句铸型的英文原声例句铸型的相关英语短语等内容。

铸型的英文翻译,铸型的英语怎么说?

  • n.cast ; matrix

  • vi.mould

  • adj. calm

  • misc.casting mould

铸型的英语网络释义

... 铸型干燥炉:foundry stove 铸型;结晶器:casting mold 铸芯焊条:electrode with cast core wire ...

... moisture 湿气,湿度,潮湿 molding 塑造;铸型;造型 momentary 刹那间的;顷刻的;短暂的 ...

... 铸型 cast 铸型 mould 抓斯巴统〔晚寒武纪〕 Dresbachian series ...

... cast 使败诉;解雇;手锤测深;强行掉头;原地回转;投掷;铸件 cast 铸型 cast-in place pile 钻孔灌注桩 ...

铸型的汉英大词典

铸型[zhù xíng]

  • mould; matrix; calm; casting mould; cast:

      Iron casts better than copper.

      铁比铜容易铸型。

  • 短语:
    • 铸型壁 mould wall;
    • 铸型尺寸增量 rapping allowance;
    • 铸型充填法 mould mound filling ability;
    • 铸型烘干炉 mould drier;
    • 铸型滑泥 {材} casting slip;
    • 铸型化石 {古生} cast;
    • 铸型浇注 casting-up;
    • 铸型螺旋孔冷却 {工} spiral mold cooling;
    • 铸型落砂冲锤机 press for mould extrusion;
    • 铸型腔 mould cavity;
    • 铸型倾斜浇注法 pouring tilt;
    • 铸型寿命 mould life;
    • 铸型输送机 mould conveyer;
    • 铸型输送器 mould transfer;
    • 铸型透气性 mould permeability;
    • 铸型涂料 mold wash; moulding wash(ing);
    • 铸型退火 annealing in mould;
    • 铸型稳定性 mould stability;
    • 铸型硬度 mould hardness;
    • 铸型预热浇注法 Lanz-pearlite process;
    • 铸型装配 mould closing;
    • 铸型装配机 mould closer

铸型的英语短语

  • 铸型尼龙MCPA;monomer cast nylon;CAST NYLON;MC nylon

  • 金属铸型metal mold;metallic mold

  • 石膏铸型gypsum mould;plaster mould;gy ummould

  • 铸型尸cast resin

  • 整体铸型block pattern;full pattern;monolithic mold;block mould

  • 流动铸型flow cast;flowage cast

  • 铸型探条emplastic bougie

  • 铸型涂料[机]mold wash;mold paint;mould coating

  • 粘土铸型loam mold

铸型的英文例句

铁比铜容易铸型

Iron casts better than copper.

目的:对器官内淋巴管方法进行改良。

Objective To improve the method of casting mould of lymphatic vessel in organs.

介绍了彩色油性尼龙的加工应用技术。

The processing and applications of colouring oily monomer casting nylon were introduced.

结果:得到了完整的家兔器官内淋巴管

Result A complete lymphatic vessel casting mould of rabbit organ was got.

本文应用涂料的理论研究了新的钢水基涂料。

The new water-based coating for cast steel was developed by using the theory of mould coating.

通常要采取压紧步骤来保证良好的覆盖和坚固的

A compaction stage is typically used to ensure good coverage and solid molds.

这是最古老的铸型生产方法,主要依靠造工的技巧。

This is the oldest method of mould production and relies heavily on the skill of the molder.

测定了铁水温度和成分等对铁水表面张力的影响。

We test the influence of metal temperature and components of the mold upon surface tension of metal.

左心室的实际容积由铸型排除的水的容积来测定。

The true left ventricular volume was measured by displacement of water.

利用振动和冲击使中的砂和件分离的造设备。

The use of vibration and impact to the mold casting equipment in separation of molding sand and casting.

作者通过浇注试验法,提出了一种表观物性值的方法。

In this paper, a method of measuring apparent thermal properties of sand molds was provided by pouring method.

造工艺中使用的设备包括熔炉、铸型制作机械和造机械。

Equipment used in a casting process includes furnaces, mold-making machinery, and casting machines.

制作模采用石蜡或其它一些能被融化掉的材料做成。

The mold is made by making a pattern using wax or some other material that can be melted away.

面动脉铸型在唇缺损修复时邻近皮瓣的选择中有一定参考价值。

The facial artery casting is valuable for designing various local flaps in repairing lip defects.

目的通过对两种制作标本方法的比较,评价各自方法的优劣。

Purpose To evaluate the advantage and disadvantage of two methods through comparing making cast specimens.

方法:在64具灌注标本和4具标本上观察胰内动脉分布、吻合。

Methods:The distribution and anastomosis of interpancreatic artery were observed on 64 red latex injected specimens and 4 vascular cast specimens.

结果发现:牦牛和绵羊肺脏实质内的微静脉铸型显示的结构基本相似。

The results showed that the vasculature of venules in the pulmonary parenchyma on yak is similar with that on sheep.

规格在各种垂直分线中,占有量比例最大,适用范围最广。

The casting specification of this set of equipments is of large proportion and wide usage scope in all kinds of vertical-parted molding line.

另外,研究了消失模造法铸型表面硬度、界面换热系数的变化规律。

Moreover, the variation law of mold surface hardness and interface heat transfer coefficient were studied.

观察了50侧舌动脉剥制标本和14侧舌动脉或动、静脉腐蚀标本。

The authors studied 50 bilateral dissected specimens of lingual artery and 14 bilateral lingual arteries or arteriovenous corrosive casts.

分析了水分在中的存在形态及其在受热时所发生的传热和传质现象。

The exiting form of moisture in the mould and its transportation phenomenon when heated up is discussed.

件-铸型之间的相互作用对件凝固过程中热应力的分布有很大的影响。

The interaction between casting and mold has a significant effect on the distribution of thermal stress during solidification.

目的通过分析胆结石与胆道间的差异蛋白质,探讨胆道铸型形成机制。

Objective to study the mechanism of biliary cast formation by analyzing different proteins in gall-stone and biliary cast patients.

本文研究了铸型体系中异类材料分界面上“复合节点领域”的凝固计算。

This is an algorithm solidification simulation about"multiple nodal region"in boundary node of casting and mold system.

以大、薄壁、复杂铝合金件为对象,叙述了复合铸型的制造和应用范例。

The compound mold manufacturing and application example suitable for large thin-walled complicated Al-alloy castings were described.

基于螺线管原理的位移探测器用于完成砂紧实率及紧实度的快速检测。

A displacement sensor based on solenoid principle is used to measure green sand compactibility and mould compaction.

方法:研究对象为捐赠的人新鲜离体肝脏标本15例; 肝脏标本20例。

Methods:15 donated human fresh isolated liver specimens and 20 liver corrosion cast specimens were used in this study, .

介绍了铁锅挤压造的工艺过程、工艺控制、制作及气动压锅机的结构等。

The technological process, technological control, mold making as well as the construction of pneumatic pot squeezing casting machine have been separately introduced.

植物或动物所保存下来的遗体,如骨骼、壳体、铸型和印模,遗迹或洞穴以及排泄物。

Preserved remnants of plants or animals, such as skeletons, shells, casts or molds, tracks or borings, and feces.

提出一种处理件与铸型界面热阻问题的虚拟界面单元法,并给出了有限元计算公式。

In this paper a fictitious interface element method dealing with thermal resistance between casting and mold is presented, and the finite element formula is given.

铸型的原声例句

铸型的网络释义

铸型 铸型指铸造时用以浇入熔化的金属以形成一定形状铸件的模子。铸型包括将熔化的金属倒入铸模(同铸锭过程),铸模的型腔提供了最终有用的形状,之后仅需根据具体应用进行加工和焊接。铸型通常按照造模的方法、造模的材料或进铸模的方法进行分类。铸造工艺有四种基本类型:砂型铸造、永久型铸造、压模和离心式铸造。

以上关于铸型的英语翻译来自英汉大词典,希望对您学习铸型的英语有帮助。