锻工英语怎么说
本文为您带来锻工的英文翻译,包括锻工用英语怎么说,锻工用英语怎么说,锻工的英语造句,锻工的英文原声例
本文为您带来锻工的英文翻译,包括锻工用英语怎么说,锻工用英语怎么说,锻工的英语造句,锻工的英文原声例句,锻工的相关英语短语等内容。
锻工的英文翻译,锻工的英语怎么说?
n. ironsmith ; blacksmith ; hammersmith ; hammerer
锻工的英语网络释义
... gutter锻模飞边槽 hammer man锻工 heading mac你好ne顶镦机 ...
... 锻接forgewelding 锻造;锻工forgework;forging 锻钢forgedsteel ...
... 锻接forgewelding 锻造;锻工forgework;forging 锻钢forgedsteel ...
... GARDENER园丁,花匠,菜农 FORGER锻工 TURNER车工,旋工 ...
锻工的汉英大词典
锻工
- (指工人) metalsmith; vulcan; hammersmith; forger; blacksmith
- (锻造工作) forging
- 短语:
- 锻工车间 forging [blacksmith's; drop; hammer] shop; forge;
- 锻工钳 band jaw tongs; blacksmith's tongs;
- 锻工台砧 blacksmith's bick iron;
- 锻工物 blackwork
锻工的英语短语
锻工钳band jaw tongs;forge tongs;forging tongs;blacksmith's tongs
锻工场forge;forging shop;stithy
锻工车间hammer shop;drop shop
锻工炉hearth;forge hearth;forge;smith's forge
锻工锤[机]boss hammer;hammer
热轧锻工forging process operator
液态金属模锻工艺liquefied metal die forging technology
总锻工车间main forge
锅炉锻工车间boiler forge
锻工的英文例句
基于模糊控制理论建立了锻工模型;
A rule-based hammerer model was proposed on the basis of fuzzy control theory.
分析了汽车驱动齿轮的冷模锻工艺。
The cold forging process of the driving gear for automobiles was analyzed.
分析了汽车行星齿轮的冷模锻工艺。
This paper analysed the cold die forging technology of automotive epicyclic gears.
阐述了用冷锻工艺代替热模锻的优点。
It has elaborated the advantages replacing hot die forging with the cold forging technology.
根据某轿车行星齿轮零件设计了冷精锻工艺。
The precision cold forging technology has been designed according to a bevel gear used in car.
提出了采用模锻工艺成形铁路货车支撑座的方法。
The method to form supporting pedestal of railroad lorry by die forging was proposed.
结果表明,闭式精锻工艺的新方法是十分有效的。
The results shown that the new way of precision die forging is very efficient.
介绍了重卡前轴预成形辊锻工艺试验与结果分析。
The process experiment and result analysis of preceding roll forging for heavy truck front axle introduced in this paper.
提高焊缝性能应当从温度场分布和顶锻工艺着手。
The performance of the weld would be improved with the regulation of the temperature field distribution and the upsetting parameters.
本锤适用于锻工车间对各种形状零件的自由锻造。
The hammer is applied in different kinds of free forging in the forging shop.
本文总结了螺旋压力机模锻工艺技术的主要适用范围。
The main application range of die forging process on screw press are summarized.
结果表明,闭式精密模锻工艺的新方法是十分有效的。
The results have shown that the new way of precision die forging is very efficient.
简要介绍了中高速柴油机曲轴锻件的RR弯曲镦锻工艺。
This article has described the RR bending and upsetting process for crankshaft forging of the medium and high speed diesel engine.
分析了模具的结构特点;确定了合理的液态模锻工艺参数。
Structural features of die are analyzed and reasonable technological parameters for liquid forging are determined.
整体上讲冷锻工艺流程的设计还十分依赖于经验主义的规则。
Cold forging process design is still highly based on empirical rules and experience.
比如,锻工车间是禁止吸烟的,但他们把香烟放进他的口袋里。
For example, smoking was forbidden in the forge, but they put cigarettes into his pocket.
通过有限元模拟对磁极精密模锻工艺参数和模具结构进行了研究。
The process parameters and mould structure for precision alternator pole forging are researched through FEM simulation.
根据S形凸轮结构特点,设计了其锻件毛坯的平锻工步及其模具。
According to its characteristics horizontal forging technology of S-shape CAM and die have been designed.
叙述了辊锻工艺实质及其适用性,用辊锻成形工艺生产耙齿的优点。
The article has described substance and its applicability of roll forging technology, advantages producing harrowing tooth with roll forging forming technology.
最后,给出带盲孔的轴对称锻件的闭式模锻工艺设计的一般性指针。
At the end, some general instructions for the process design of flash die forging of axisymmetric gear blanks with blind hole were suggested.
而且,对于闭式模锻工艺而言,坯料尺寸直接影响模锻工艺的顺利进行。
And as for the closed die forging, billet size will affect the process directly.
本文研究了不同热模锻工艺参数对GH4169合金锻件组织性能的影响。
The article researches the effect of different hot die forging process parameters on forgings structure and properties of GH4169 alloy.
叙述了羊角锤新旧模锻工艺过程,介绍了活动模具的动作原理及模具结构。
Described the technological process of the new and the old forging die for the claw hammer, introduced the working principle of the movable die and die structure.
文章分析了精锻工艺的可行性,介绍了高能螺旋压力机公称压力值的计算方法。
The paper analysis the forging craft of rocker shaft bed part, introduce the computing technology of high energy screw press apparent pressure value.
分析了粉末烧结材料镦粗和复压工艺的致密效果,提出了闭式模锻工艺设计原则。
The densification effects of upsetting and repressing are compared, and a technology design principle for closed die forging is suggested .
按照镦锻工艺的要求,提出了改进的加热制度,为实际生产应用提供了依据和参考。
The improved induction heating schedule was put forward according to demands of upsetting process. It provides basis and references for practical production.
亚美尼亚的金品锻工术已有漫长和卓越的传统,人们居住在用金饰物品布置的市场一角。
Armenian gold smithery enjoys a long and distinguished tradition, populating one corner of the market with a selection of gold items.
介绍了钛合金斜盘模锻工艺流程、热处理规范以及工艺要求,并进行工艺试制和应用。
The Titanium alloy swashplate's pressure forging process, heat treatment criterion and process request are introduced and trial-manufactured.
本项技术已在生产实际中应用多年,完全取代了旧的热锻工艺,工艺稳定,设备可靠。
This technology has been applied in actual production for many years, replacing completely the old hot-forged technology, which is stable with reliable equipment.
本项技术已在生产实际中应用多年,完全取代了旧的热锻工艺,工艺稳定,设备可靠。
This technology has been applied in actual production for many years, replacing completely the old hot-forged technology, which is stable with reliable equipment.
锻工的原声例句
锻工的网络释义
锻工 把金属材料加热到一定温度,锻造工件或毛坯的技术工人。
以上关于锻工的英语翻译来自英汉大词典,希望对您学习锻工的英语有帮助。