阻并英语怎么说

admin2024年11月06日中英词典4590

本文为您带来阻并的英文翻译,包括阻并用英语怎么说,阻并用英语怎么说,阻并的英语造句,阻并的英文原声例

本文为您带来阻并的英文翻译,包括阻并用英语怎么说阻并用英语怎么说阻并的英语造句阻并的英文原声例句阻并的相关英语短语等内容。

阻并的英文翻译,阻并的英语怎么说?

  • 阻并

  • Resistance and

  • 以上为机器翻译结果,长、整句建议使用 人工翻译 。

阻并的英语网络释义

阻并的汉英大词典

阻并的英语短语

  • 电阻并联Parallel Connection

  • 分流电阻并联电阻shunt resistor

  • 电阻并联电路AC

  • 并联电阻[电]parallel resistance;shunt resistor;Rsh

  • 并联阻抗shunt impedance;[电]parallel impedance;impedance in parrallel

  • 电阻的并联parallel connection of resistance;Parallel Resistors

  • 等效并联电阻RLP;[电]equivalent parallel resistance

  • 应用低阻抗并联ZGNDLEAD

  • 并激电阻shunt-field resistance

  • 并联电阻器parallel resistor;resistor parallel;resistor;parallel

阻并的英文例句

运行测试表明,静电除垢装置能有效地起垢、除垢、防腐作用,具有制造成本、运行费用低,效率高,无二次污染等特点。

The running tests showed that the processor could remove scale and keep from corrosion effectively and had a characteristic of low making and running costs, high efficiency, and no second pollution.

进口疏水阀或称进口疏水器是用于蒸汽管网及设备中,能自动排出凝结水、空气及其它不凝结气体,水蒸汽泄漏的阀门。

Import import trap or trap is known for the steam pipe network and devices, can automatically discharge condensate, air and other non-condensing gas, and blocking water vapor leak valve.

讨论污垢与换热的理论关系,详细模拟污垢热变化对该污水源热泵系统性能的影响。

The relationship between fouling and heat exchanging was discussed, and the performance of this system with the change of fouling thermal resistance was simulated.

为了深入研究,我们在模型中采用离散热力学分析定义了在机床导轨热控制中广义热的概念。

For the deep research, we apply the discrete thermodynamic analysis and define the concept of the virtual thermal resistance in the heat control of the machine tool guide.

介绍了热线式、超声波式、硅压固态正交式三类测风传感器,对这三类测风传感器的性能进行了比较。

This paper introduces hot wire, ultrasonic and silicon piezoresistive solid orthogonal wind sensors, and compares the performance of the three wind sensors.

探讨分析具有光致负特性的双极型硅光电三极管阵列中各单元器件设置偏流隔离电的必要性。

The necessity of setting the bias current and segregation resistances in every element of bipolar silicon photo-negative resistance phototransistor array is studied and analysed.

以高型喷油器为例,在整个流量范围内对其进行测试对测试数据加以分析总结,得出了该喷油器流量特性的一些重要参数。

Taking a high resistance injector as an example, the test data gained in the whole flow range had been analyzed and summarized in order to educe some important flow characteristics parameters.

本文详细介绍了长效固体降剂的工频和冲击试验结果对此进行了深入的分析讨论。

This paper describes and analyses in detail the testing results of long effective solid agent of decreasing grounding resistance of current with industrial frequency and impulse current.

本文介绍了管道整体保温结构热测试装置的原理和组成,分析了该装置的测量误差。

In this paper, principle and constitute of thermo-resistance detector of integral insulation construction in pipeline are introduced and error in measure is analyzed.

在设计点附近选取合适的半基准圆锥激波角考虑粘性影响时,可得到乘波体最大升比为3.36;

The biggest lift drag ratio 3.36 considering viscous effects is obtained at Mach 6 when a proper base conical shock wave angle is chosen.

在分析的基础上,提出了铲取区间水平等线的概念,建立了基于水平等线的铲取区间控制策略。

In this phase, the concept of horizontal resistance isoline was developed, and the autonomous control strategy was established as moving the bucket follow it.

本文简要地论述了高分子聚合物稀溶液管道减的特点,探讨了在输油管道上应用的可能性与存在问题。

This paper gives a brief introduction of the drag reduction characteristics of the dilute solution of high polymer in pipelines, the possibility of its application to oil pipelines.

提出一种处理铸件与铸型界面热问题的虚拟界面单元法,给出了有限元计算公式。

In this paper a fictitious interface element method dealing with thermal resistance between casting and mold is presented, and the finite element formula is given.

针对偏瘫病患者身体接触面间的压力分布检测,提出研发了一种基于压效应的新型非硅薄膜网格压力传感器。

A new type of non-silicon thin film grid pressure sensor was brought forward and devised to detect and measure the pressure distribution between the bodies s touching surfaces of hemiplegics patient.

设计、制造测试了一种新结构硅微机械压加速度计。

A new structure silicon piezoresistive micromachined accelerometer has been designed, fabricated and tested.

对印制板采用丝网印刷液态感光成形焊剂的制作进行了简单介绍,对该制作工艺和品质控制进行了较为详细的论述。

The manufacture of liquid photosensitive solder mask for PCB by screen printing is briefly introduced. The process and its quality control are also discussed in detail.

斜槽电机的电性负载和感性负载时的实验波形,对实验结果进行了分析。

The relative analysis of both the pure resistor load and resistor-inductance load are given also.

介绍了新研制的HD 651型大功率局部通风机成功降噪的性消声技术原理、结构和有关计算,应用在通风机上进行实际检测。

The technology principle, construction and design calculation of resistance noise reduction for HD6 5 1 big power local ventilation fan developed recently are discussed in this paper.

采用推块型外保温自挂板技术对现浇钢筋混凝土剪力墙进行外保温,使其达到超过墙体节能标准要求。

The wall energy saving standard can be reached or exceeded by adopting check block type self-cladding technique for exterior insulation of cast-in-situ reinforced concrete shear wall.

通过数值计算方法,模拟回转体在水下的航行,分析回转体周围流场、压强及其壁面上力的分布,根据计算结果为该回转体设计了有效的微气泡减方案。

The flow field surrounding the revolving object, pressure and resistance distribution on its wall were calculated in order to design a micro-bubble reducing resistance scheme for the revolving object.

合成了季铵化腐植酸水处理剂,对其杀菌灭藻、垢、缓蚀性能进行了评价。

Water treatment agent of quaternary humic acid has been prepared, its properties of biocide and scale and corrosion inhibition are evaluated.

这里研究在转杯纺加捻区中加装扭件后,讨论分析加捻区中纺纱张力的变化,进而构成扭件产生的扭矩以及形成扭件前后区域捻度分布的变化建立捻度分布模型。

The change of spun tension, the forming of resistance torque and the change of twist distribution are discussed when adding the resistance torque element in the rotor spun twist zone.

激光功率密度和后续热处理温度对PT C热敏电和电温度系数影响较大,都存在一个最佳值。

The laser power density and the temperature of post heat processing have great effect on the sheet resistivity and TCR of PTC thermistor, and there exist optimum values for these parameters.

介绍了一种新型缓释型水处理剂的合成工艺,对其结构、缓蚀、垢、分解性能进行了研究。

The experimental results showed the agent was an excellent corrosion and scale inhibitor, and also overcame the disadvantage of rapid decomposing of the traditional water treatment agent.

目的:验证三子咳喘胶囊对慢性支气管炎(痰湿肺证)的疗效,对其安全性作出客观评价。

Objective: To certificate the curative effects of Sanzi Kechuan Capsule in treating chronic bronchitis with syndrome of phlegm-dampness accumulated in the lung, and evaluate objectively its safety.

利用直接数值模拟方法求得平板上V—型条纹表面上的降情况,给出基于二次流动理论的降机理。

The drag reduction of plane-surfaces with V-shaped grooves is given out by direct numerical simulation, and the drag reduction mechanism in the base of the secondary flow theory is suggested.

本文主要利用第一类方法,对半导体激光器阵列的稳态热进行测量,详细介绍了半导体激光器各个参数的测量方法。

In this article, we used the first method to test the stable thermal resistance, and we introduced some testing methods to test the parameters of semiconductor lasers.

分析了铁路卸油鹤管气产生的原因和影响因素,给出了分析计算实例。

In this article, the analysis on the causes and influence factors of vapor lock of railway swing arm for unloading oil are carried out, and a computational practical example is given.

本文分析了压型压力传感器的零点温漂产生的原因,介绍几种补偿技术。

This paper analyses the origin of the temperature drift of the bridge offset for the piezoresistive pressure sensors and presents some of the compensation technique to minimize it.

本文分析了压型压力传感器的零点温漂产生的原因,介绍几种补偿技术。

This paper analyses the origin of the temperature drift of the bridge offset for the piezoresistive pressure sensors and presents some of the compensation technique to minimize it.

阻并的原声例句

阻并的网络释义

阻并 zǔ bìng ㄗㄨˇ ㄅㄧㄥˋ 阻并  犹阻抑,克制。《醒世姻缘传》第八回:“﹝ 高四嫂 ﹞说着,起来,又拜了两拜,说道‘阻并阻并’。去了。”

以上关于阻并的英语翻译来自英汉大词典,希望对您学习阻并的英语有帮助。