高碳钢英语怎么说

admin2024年10月30日中英词典4430

本文为您带来高碳钢的英文翻译,包括高碳钢用英语怎么说,高碳钢用英语怎么说,高碳钢的英语造句,高碳钢的

本文为您带来高碳钢的英文翻译,包括高碳钢用英语怎么说高碳钢用英语怎么说高碳钢的英语造句高碳钢的英文原声例句高碳钢的相关英语短语等内容。

高碳钢的英文翻译,高碳钢的英语怎么说?

  • high-carbon steel

高碳钢的英语网络释义

... 高电压 high voltage 高碳钢 high carbon steel 干燥法;干材法 seasoning ...

... 高速钢丝High Speed Steel Wire 高碳钢; 硬钢High Steel 高强度合金钢锁扣High Strength Alloy Steel Shackle ...

详情:根据材质可分为:高碳钢HCS)、高速钢(HSS)、双金属(BIM)以及合金工具钢锯条高碳钢HCS):主要用于..

在自行车管材之上一般都是高碳钢HI-TEN)和铬钼钢(CR-MO),高碳钢比重高,一般用于民用自行车,而铬钼钢可进行抽管加工、韧性好、强度高,所以多用于运动类自行车,当然...

高碳钢的汉英大词典

高碳钢

  • {冶} high-carbon steel

高碳钢的英语短语

  • 高碳钢片High Carbon Steel Strip

  • 高碳钢丝SWC;high carbon steel wire

  • 热处理过的高碳钢High-Carbon Steel Heat Treated;Carbon Steel Heat Treated;high carbon steel heat treated

  • 超高碳钢UHCS;ultrahigh carbon steel

  • 高碳钢芯HIGH-CARBON STEEL CORE

  • 高碳钢线材High carbon steel wire rods

  • 高碳钢盘条high carbon steel wire rod;SWRH

  • 耐磨性比高铬高碳钢高HRC

  • 由高碳钢线high carbon steel

高碳钢的英文例句

综述了超碳钢超塑性的研究进展。

The recent development of researches on superplasticity of ultrahigh carbon steels (UHCS) is reviewed.

材质为高碳钢,含热处理及染黑。

Made of carbon steel and hardened with black oxide finished.

研究了超碳钢的组织和性能。

The microstructure and properties of ultra-high carbon steel (UHCS) was investigated.

德国空心地面硬化钢,高碳钢镀铬刀片。

German hollow-ground hardened steel, high carbon chrome-plated blade.

研究了超声处理对高碳钢铸锭内气孔的影响。

Effect of ultrasonic treatment on the porosity of high carbon steel ingot was investigated.

介绍了酒钢微合金高碳钢硬线轧制工艺研究。

This article presents research on rolling technology of micro-alloyed high carbon hard wire at JISCO.

讨论铬微合金化对大规格高碳钢线材质量的影响。

The influence of cr microalloying on the quality of large size high carbon steel wire rod is discussed.

提出生产高碳钢线材过程中减少夹杂物的关键措施。

Key measures to decrease inclusion are put forward as producing high carbon wire rod.

文章介绍了高碳钢盘条与铸坯质量相关的组织缺陷。

The microstructure defects related with casting quality of high carbon steel rod were introduced in this paper.

提出生产高碳钢线材过程中减少夹杂物的关键措施。

Key measures to decrease inclusion are put forward during producing high carbon steel.

铌微合金化处理后高碳钢线材的力学性能得到了改善。

After niobium microalloying for high carbon steel, the mechanical properties of wire rods was improved.

介绍无酸洗拉拔工艺在高碳钢丝半成品生产上的应用。

To introduce the application of pickling free drawing process to semi finished high carbon steel wire production.

研究了合金化和球化工艺对超高碳钢组织和性能的影响。

The influence of alloying and spheroidization process on microstructure and mechanical properties of UHCS is investigated.

高碳钢搅拌刀片,坚韧无比,不生锈,不钝化,寿命超长。

High-carbon steel mixing blade, extremely tough, non-rusting, non-passive, long life.

本发明的制耐火砖的超碳钢材料工艺属于耐火材料领域。

Extra-high carbon steel material process of the present invention relates to the field of refractory materials.

高碳钢也很适用的其它地方包括钻头夹头、定位仪和耐磨垫。

Other applications where high carbon steels are well suited include drill bushings, locators, and wear pads.

研究成品成分与高碳钢线材力学性能的关系,得出回归方程。

The relation between composition and mechanical properties of high carbon steel wire rod is analyzed, and the regression equation is obtained.

根据碳元素的含量,碳素钢可再分为低碳钢、中碳钢和高碳钢

Of course I know. according to the amount of the carbon content, carbon steels can be divided into low-carbon steel, medium-carbon steel and high — carbon steel.

用正交试验的方法研究了不同工艺参数对高碳钢力学性能的影响。

The effects of different technological parameters on mechanical properties of high carbon steel wire have been investigated by crossed test method.

主要研究了在超声波作用下不同添加剂对高碳钢凝固组织的影响。

The effect of different additives on solidification of high carbon steel with ultrasonic treatment was investigated.

高碳钢是最能被硬化的一种碳钢,常常用于高耐磨性很重要的地方。

High carbon steels are the most hardenable type of carbon steel and are used frequently for parts where wear resistance is an important factor.

请指出低碳钢、中碳钢和高碳钢的碳含量范围,指出一些它们应用的实例。

Point out the range of carbon content of low-carbon steel, medium-carbon steel and high-carbon steel. Give some examples for their applications.

由于碳在这类钢中的含量很高,用高碳钢制作的零件通常很难被加工和焊接。

Since the carbon content of these steels is so high, parts made from high carbon steel are normally difficult to machine and weld.

研究了加热温度和冷却速度对高碳钢正火钢丝的显微组织和力学性能的影响。

The effect of heating temperature and cooling speed on the micro-structure and mechanics characteristics of high-carbon-steel wire normalized was studied in this paper.

研究了用LF炉冶炼中高碳钢的主要元素从冶炼结束到连铸过程的变化规律。

The change law of main elements in high-carbon or medium-carbon steel from the end of smelting to continuous casting process with LF furnace is researched.

从显微组织形态的角度探讨了高碳钢中的各类金相组织对材料拉拔性能的影响。

The effect of kinds of microstructure on drawing property of high carbon wire rod are discussed on the view of shape of microstructure.

对取样条件、试样制备、测量方法进行探讨,指出高碳钢化学分析的控制要点。

The sampling conditions, sample preparation and measure methods are discussed and the control points of chemical analysis of high carbon are pointed out.

采用热力学方法,研究了稀土氧化物对中高碳钢堆焊金属中夹杂物的变质作用。

The modifying effect of RE oxide on inclusions in hardfacing metals of medium high carbon steel was studied by means of thermodynamics.

采用热力学方法,研究了稀土氧化物对中高碳钢堆焊金属中夹杂物的变质作用。

The modifying effect of RE oxide on inclusions in hardfacing metals of medium high carbon steel was studied by means of thermodynamics.

高碳钢的原声例句

高碳钢的网络释义

高碳钢 高碳钢(High Carbon Steel)常称工具钢,含碳量从0.60%至1.70%,可以淬火和回火。锤、撬棍等由含碳量0.75%的钢制造;切削工具如钻头,丝攻,铰刀等由含碳量0.90%至1.00%的钢制造。

以上关于高碳钢的英语翻译来自英汉大词典,希望对您学习高碳钢的英语有帮助。